OK so here’s the new set up
I’m going to be doing over the winter
340 block 30 over Forged factory stroke crank factor rods with ARP bolts, icon, pistons Lunati solid, flat, tappet 546-566 lift advertise duration 272 280 duration at 50 /243 /251
B1 cylinder heads
Hand ported have not put them on the flow bench yet I believe about 260 ish hopefully more 11.8 to 1 compression
Crane roller rockers 1.5 Edelbrock air gap 750 Holly Speedmaster distributor orange box
Trans is a 727 Reverse manual valve body, PTC 3200 stall 8 3/4 with a 391
26 x 11 Hoosier
Car weighs 3200 with me in it
So now let’s do the guessing game. What do you guys think it’ll run in the quarter-mile And estimated horsepower
I’m going to be doing over the winter
340 block 30 over Forged factory stroke crank factor rods with ARP bolts, icon, pistons Lunati solid, flat, tappet 546-566 lift advertise duration 272 280 duration at 50 /243 /251
B1 cylinder heads
Hand ported have not put them on the flow bench yet I believe about 260 ish hopefully more 11.8 to 1 compression
Crane roller rockers 1.5 Edelbrock air gap 750 Holly Speedmaster distributor orange box
Trans is a 727 Reverse manual valve body, PTC 3200 stall 8 3/4 with a 391
26 x 11 Hoosier
Car weighs 3200 with me in it
So now let’s do the guessing game. What do you guys think it’ll run in the quarter-mile And estimated horsepower
