[WANTED] Wrist Pin Retainers

-
Status
Not open for further replies.
Gotta check the thickness of the locks needed and if there are 1 or 2 per side (based on the groove widths). Could be C-clip or Spirolox.

Same locks as a big block Chevy are used because the wrist pin diameter is within a few thousandths of a small block Mopar. (.990" vs .984")
 
I have 2 sets of 116's in stock, I'll check what's in the the box and report back.
 
This is what's in the box. If U can't get some I can send some. Graham. Sorry about the double pic post, but you get the idea!
100_3309.JPG
100_3309.JPG
100_3312.JPG
 
I have a bunch of the spirolox retainers. Number 107-3 on the packages. Same as what I got with a set of KB243 pistons for a 340.

Ken
Edison, NJ
 
Thanks for the replies, let me run down that speed pro # and see what I find. If I dont Ill get back to you. Thanks again.

Tim
 
IDK But the Speed Pro catalog says the locks are with the pistons. Summit said they are not and Jegs said nothing. I,ll have to wait and see
 
Status
Not open for further replies.
-

Back
Top