[WANTED] Yoke, pedals & dust shield wanted

-
Status
Not open for further replies.
easymotorspo

easymotorspo

Well-Known Member
Joined
Dec 23, 2014
Messages
167
Reaction score
73
Location
North Carolina
Rating - 100%
7   0   0
Contact seller
I am looking for 4 pieces for my project

29/30 slip spline yoke
manual brake and clutch assembly
Dust cover for a 10.5 Bell housing (4 speed)
Starter shield cover

None of these need to be perfect or for a concourse restoration. Must be affordable & willing to meet or ship to NC 28640-9621. Must take check or paypal. Thanks so much, Erick

PS if you happen to have any pictures of above items, feel free to add. I wasn't able to load any.
 
Last edited:
cudamark said:
What year and model are you working with?
Click to expand...
For which part? The yoke is a 727 or a833, 29 spline
The assembly unit doesn't really matter as this is going in a 31 dodge rat rod, and will have to be heavily modified
The dust shield and starter shield cover is for a small block mopar 10.5 bellhousing with a a833 4speed trans.
 
Its either 30 spline or 26 spline. never made a 29 spline that I am aware of. Brewers will have all your parts for reasonable prices.
 
Status
Not open for further replies.
-

Back
Top