Search results for query: *

My back-up lamps wont work unless i piush hard on the 4 speeds lever. The reverse linkage is correctly adjusted and as there is no adjustement on the switch. should i replace the reverse switch or the problem is somewhere else? BTW, if i replace the switch, do i need to drain the transmission...

Was FE5 Rally red available in 1971? Also, was white bucket seats available?

Anybody are using that module in their HEI conversion. I like the rev limiter feature. https://www.summitracing.com/int/parts/pnx-d72000/overview/

The engine on my 1971 Duster 340 moved back about an inch. The left motor mount just pivot itself on the single mounting bolt. Any suggestion of why? how to fix it? New Schumacher engine mount and brackets.

Want to install a 1973 oem brake booster on my 1971. There a "spacer w filter" that goes between the booster and master. Which way does it goes?

My car was running great but today, it wouldn't restart. Didn't touch anything. No spark to the sparkplug. 12 v at coil. So it may be the Ignitor 111 module that's shot. How could i check that module? I want to be sure before buying a new one?

Looking for 1971 Duster front marker lamps harness, Other year may fit... Shipping to 12919 NY Thanks

I need trim rings for my 15 x 8 wheels. The only one i've found are for 15 x 7, so there're a gap. Do you know a company that does those? Thanks

1971 Duster with 1973 up master cyl, booster and disk brake set-up. I've installed a new proportioning valve and bleed the system. Everything sems fine except for the brake warning light that'on. The car is still on jackstand so i'm not able to do a test drive. Could it be the the way i bleed...

On a 1971 Duster, rear bumper brackets to body, what's the size of the bolts? My car was a basket case and i don't have those. Thanks

What color should be a brake booster for a 1971 Duster. Black or gold anodized? I've got a nos brake booster for a 1973. Is it the same?

What is the difference between P4500268-69 and P4120863-64 Mopar Performance Leaf spring? Both are listed at 2800 pounds. My car is a 1971 372 Duster. i want the rear end to be a bit higher than stock, maybe an inch or so.

Does somebody know a supplier who has quarter glass weatherstrip for a 1971 Duster? All the suppliers i've looked are BO...

Bought a Satellite Sebring with a built 360. Can't adjust the timing, pinking like hell unless i have about 0 advance, then idle not that good, about 5 lbs of vaccum. Spec i've got on the engine, The PO passed away so i don't have all the spec. What i've got: Hypereutectic teflon coated 9.5 to...

Anybody use Motive Gear and pinion? Are they quality product? Thanks http://www.motivegear.com/

Just ordered an MSD 8222 coil. I'm a bit confused, do i need to keep the Ballast resistor or not? I will using that coil on my 1972 stock electronic ignition. From MSD installation instruction: This Blaster Coil Kit is intended to be used with an MSD Ignition. If installing on a stock...

Looking for a set of headliner bows for a 1971 Duster. I need the type with the bends on the end, not the type that uses the "V" shaped clips. The roof structure of my car has 3 holes that the bows hook into one of the holes. There is a short 90 degree bend on the ends of the bows Must...

Wanted, an original tach for my 1971 Duster 340. Do not need to be functional, will buy as a core. Shippie to 1219 NY

Looking for a 1971 Duster, liquid vapor separator, it's a cylinder abour 15" long with 5 pipes at the bottom.

Wanted: 340 1971 valves covers. Must be in good to excellent condition. Shipping to 12919 NY

Hi, i'm looking for Headlamp and wiper knob for my 340 1971 Duster. Any repro available.? I will prefer original if the chrome is nice. Thanks shipping to 12919 Champlain NY

Just bought a generic "254-AS" Accelerator cable for my stock 1971 340. It's too short and all the supplier that i find list the same part number for 1967-76??? Does anybody know the the right part number/supplier? I'm after the original look so no Lokar etc... Thanks

Hi, looking for a 1971 Thermoquad. Must be rebuildable.... Thanks 4972 71 340 MT (3512820) or 4973 71 340 AT (3512821)

I'm buiding a 372 ci, using a 340 engine block and Scat rotating assy. I'l be using a Hugues hydraulic roller cam HER1418ALN-10 cam (valve lift .520, .544, 214/218 duration),1.6 roller rockers, TTi headers and 1971 stock intake and Thermoquad. What are the best Iron cyl head for the street...

What are the best valve cover gkt for an 340? how about MP rubber with steel core ? or Moroso blue silicone? And cyl head gkt for a 372 with steel head?

Looking for a 1970-71 Duster Rally Dash panel (metal part) May take the whole dash assy. Must ship to 12919 NY. Thanks.

I've bought a new engine wiring harness for my 1971 Duster But i still need the wire running from the fuse link to the starter relay. I could built one but i need the gauge of that wire. Is it 10 ou 12 gauge?

Just bought my first old car, a 1971 Duster, Low options, was 318, 3 speed, Plum crazy, black bench seat. Now 318, 4 speed, custon blue color. Came with a standard bore 340 bare block, X heads, lots of new parts including weatherstrips, carpet, headliner, sill plates, outside door handles etc...