Search results for query: *

:glasses7:Cruisin the Coast and Mopars at the Marina coming up soon! Can't wait to go. Who all from FABO is planning to go? We will be there with the Green Swinger, see yall there!!!:burnout:

Went to the parts house this morning to pick up some Valvoline VR1 for the Dart this morning. I'm running a Comp Mutha Thumpr flat tappet cam in the 360. I'm also not totally comfortable "supplementing" oil with pour in additives due to the unknown effects of the oils detergents and the...

Went to the parts house this morning to pick up some Valvoline VR1 for the Dart this morning. I'm running a Comp Mutha Thumpr flat tappet cam in the 360. I'm also not totally comfortable "supplementing" oil with pour in additives due to the unknown effects of the oils detergents and the...

Ok guys, long story short. Pulled the slant out to paint the engine bay before my 360 swap. I unplugged the bulkhead connectors and found them to be in good shape. Got the bay painted and reinstalled the harness and dropped in the 360. Bumped the starter and all is well. Got all the wiring...

Hi all!. Was curious about what ya'll were running for a transmissiion cooler. I went to the local pick and pull and got a cooler out of an '06 Dodge truck (1/2 ton) and one from a Durango. The Durango cooler is about twice as wide as the truck unit. These are the ones that bolt to the trucks...

Anyone run Jones "Full Boar" true 3 inch glass packs? Do you like the sound? Tempted to get a pair for the Dart. I like the old school thump of the old Thrush or purple hornie header mufflers,,,,,,,

::D Just finished starting the 360 for the first time since the rebuild. I'm stoked. Here's my combination: '79 360 block .030 over '596 smogger heads with Milodon 2.02 and 1.6 and more porting time than I care to remember. Balanced stock crank with Eagle H-beams and KB 107's at zero deck B&M...

Hello all. Doing a 360 for the Dart. Full interior cruiser that I want to have a bit of fun with. (And scare an import or Chevy/Ford or two) Dart is powered by the /6 7.25 screamer combo now. The upgrades: Building a zero deck 360 with KB107's balanced with H-beams. Comp Mutha Thumpr with Crane...

148982_102334776571866_11423545818_105:toothy1:47612_102333599905317_865058232_n.jpg2334396571904_82345010_n.jpg8401542095_102332856572058_1495690941_n.jpg6536033_102333169905360_1570236818_n.jpg5243535155_102333496571994_442352062_n.jpg45_102333279905349_1858059144_n.jpg90_102332956572048_486063...

Long story short, I ordered a Comp Mutha Thumpr last night for the 360. I was comparing Comps spring recco vs the Trick Flow springs I already installed on the heads. Comps p/n 995-1 specs are 1.437 outside diameter, coil bind at 1.02, 402lbs/inch The new Trick Flows I have are 1.495 outside...

Anyone mill KB 191 pistons? I've had a set on the shelf for years for a 360 I was going to set up to race. Ended up doing a 440 stroker instead for my Duster. I'm gathering parts now for the 360 to put in the Dart. Now I know it would be easy to get a set of 107s or the speed pro's. I'd like a...

Here's a few snaps of my Dart.

Hey guys, I did the 8.8 exploder rear cut down for the Dart. It's not installed yet but was curious about rim offsets. I'm not opposed to moving the leafs inboard or going coilover. What size wheels and tires have yall installed with this swap with the leafs in the stock location? Thx in...

long time Mopar nut. Current inventory- 1973 Dart /6 (for now) 360 parts gathering underway! 1971 Duster drag project. 500 stroker, 440 based with Indy 440-1's, JE pistons 15:7.1 comp. Alky dominator etc.. will finish "one of these days" 2006 Dodge 2500 Hemi 4x4 daily driver.