Search results for query: *

just replaced my 5.2 to a 5.9 in my 98 dodge ram due to it throwin a rod, after putting the new engine in i had a bad ground and one little ground on the passenger side of the truck coming from the fire wall the block started to smoke, this was on the first inital turning over of the motor fixed...

so i replaced the cross memeber in my 67 valinant becasue the passanger side had tore apart where the torsion bar goes through at. we pulled the doner cross member from a 72 and i just set it in there to test fit and i wanted to slide the torsion bars in to make sure everythings good but the hex...

hey im lookin for a fly wheel for a 360 i live just north of detroit but will pay to ship thanks, john

hey guys how do i figure out the cc of my heads, i want to buy upgrade pistons for my 360 but do not know the cc. they are the 915 j heads with no machine work done to them other then a valve job, with the 1.88/1.60, and the deck height is stock nothing has been milled, is there a standard cc...

i have a stock bottom end 318 ran strong just needed to be freshend up. i put a .465/.443 lift cam in and then stock 360 heads, now it does not seem to pull as hard as it used to, are the heads just not going to work, would i be better off with the stock 318 heads any help would be appreciated...

i really need a flywheel for a 360 for a 10 inch clutch let me know what you have, thanks, john

hey guys i was given an Offenhauser Single Quad High-Rise Intake and im doing a mild build on a 360 i was wondering how this will perform? i do plan on getting it port matched and all that facny stuff

hey guys i have a 67 valiant im planing on running come the spring time after i get more work done. and im wondering what you guys think it will run in the 1/4 360 flat top pistons j-heads The 1.88 ones 484/484 cam cast iron 340 ta intake 650 dp dodge ram 4 speed 4.10 posi and slicks im...

hey guys i go to lakeview high school in st clair shores mi and for our after school auto program we are planing on having a car show come spring time to help raise money for the auto shop. it would be on a saturday or sunday and we thought about throwing in a little swap meet with it. im jsut...

i have an 833 trans in my valiant and it will not go in reverse, we are makin custom rods because the trans is out of a truck, the shifter worked great before and now when we went to put it in the car it seems that the shifter doesnt want to go move the reverse lever(the one on the shifter it...

hey im looking for a 45 inch from yoke center line to center line drive shaft im in the detroit area im looking for one that is close by but if the price is right ill pay to ship it, thanks john

im lookin for some decent window chrome for my 67 valiant it doesnt have to be perfect just semi decent

i am gettin ready to paint my valiant and we have never done 2 stage paint(base coat, clear coat) we have only done the single stage and the color i want only comes in the 2 stage, i do not know what you have to do differently for a 2 stage paint be sides the clear and when do you apply the...

i have a set of regular 360 heads and a set of 915 j heads i want to add more power to my 318, will putting the regualr 360 heads on add more power since they do ahve the bigger valves or am i just going to waste my time putting them on and if i do put them on should i get them shaved at all...

hey guys i wanna build a 408 stroker but i dont know what kit i should go with let me know what i should go with, im goin to be using a set of j heads if that helps at all and im not looking to spend much over 3 grand in the end

i have a 318 .030 over, 340 cast iron intake, and a .443/.465 cam and headers, i was wondering what i would get the best sound with, i want loud but still sounds good. i was either going to go with 3inch enter and exit cherry bombs or puple hornies, let me kno what u think.

i have a 340 cast iron intake on my 318 casting number "3462848" and i have a edelbrock perfromer intake , im putting my j heads on on the 318 casting number "3418915" am i better off using the cast iron 340 intake? i have heard that it is better then the performer, also the ports on the...

I need a pickup/fuel sending unit for my 67 ,/6 Valiant. Maybe someone upgraded to the larger 3/8 and have one laying around. I need one that works, I allready have a broken one. Please e-mail me [email protected]

I am still running the small bolt ralleys on the front and have 1 cone style center cap and need a driver quality cap for the other side. Please e-mail me , [email protected]