plumkrazee70
Well-Known Member
I degreed the new cam in the 340 and verified installed centerline of 106, which matches the lunatic cam card.
So now I have #1 at TDC. The crank dot is at 12 o clock and the cam is at 6 o'clock. Do I need to roll the engine around one full revolution so #1 is ready to fire? (Cam and crank at 12 o'clock) I have the heads and intake off, currently.
So now I have #1 at TDC. The crank dot is at 12 o clock and the cam is at 6 o'clock. Do I need to roll the engine around one full revolution so #1 is ready to fire? (Cam and crank at 12 o'clock) I have the heads and intake off, currently.