pettybludart
Well-Known Member
It looks like a valve hit #3cylinder,s piston(bend valve?)and some major detonation in cyl #5.Still a good buy for $170,atleast now you know what you have.
Bad pinging issue?
- Thread starter 2manymopars
- Start date
-
2manymopars
AKA mopar_daddy
Yes 3,4,7+8 all have same mark they all need to be switched so the valve reliefs line up. I threw the heads on their side and filled the runners W/ fuel and no leakage, If the valves are bent the triple springs are keeping them well seated. I saw no marks on the valves, but it looks like the piston was hitting the casting flange of the valve seat. which is feasible with the deck height.It looks like a valve hit #3cylinder,s piston(bend valve?)and some major detonation in cyl #5.Still a good buy for $170,atleast now you know what you have.
2manymopars
AKA mopar_daddy
pic.
o1heavy
1974 dart sport
sweet easy fix just move the pistons and rods to match the reliefs
what a deal for 200 bucks
what a deal for 200 bucks
o1heavy
1974 dart sport
what cam is in it
moper
Well-Known Member
ouch. I love cheap stupid mistakes...lol. Fix the piston order, smooth out the sharp edges, and have fun....lol.
OldmanRick
Well-Known Member
Oh that's good, but it still doesn't top this...
OldmanRick
Well-Known Member
Oh that's good, but it still doesn't top this...
That's a riot....lmao. Don't see any valve marks...did that thing ever run? Must have had a 390" lift cam in it...lol.
-
