Stop in for a cup of coffee

-
Don't know if you saw my earlier post. We are flying into Harrisburg instead of a 2 hour drive from Baltimore. Harrisburg ok?? I realize its probably a small airport.
 
Prob cost a lot more than BWI. I actually fly out of BWI. Yes prob 20 minutes away from the fairgrounds. When you land look at the strange c-130's there that's where I used to work.
 
Supposed to work also we shall see! Price was right on it think I have a stand for it also. Will still open it up and paint the case.
 
Supposed to work also we shall see! Price was right on it think I have a stand for it also. Will still open it up and paint the case.
If I didn't already have a load tester I would be a buyer for that one.
 
Have four testers that do that now a snap on unit needs a gauge a old military VAT, a vat 28, 30 now a 40! Might keep one handy to have around.
 
Man love this place for small electrical parts!
Talon Electronics | Electronic Parts at Discount Prices
They don't show a flux capacitor. Oreillys appears to be sold out. https://www.oreillyauto.com/flux-capacitor My time machine is broke
Don't know if you saw my earlier post. We are flying into Harrisburg instead of a 2 hour drive from Baltimore. Harrisburg ok?? I realize its probably a small airport.
It is small. Not bad though. Flew from there a few years ago. I have a friend from Lancaster that flies out of there frequently. Saves a lot of time/ BS getting in and out compared to BWI.

Good Morning
 
Last edited:
All I have room for now are the smaller testers. Bet all of them go at Carlisle. Have a really cool snap on set I have to finish tach/rpm and ohms I believe two testers on a stand but this is my favorite and have two of them, one display only and the other works.
Then this one is super cool 1940's
DSC02157.JPG
DSC02237.JPG
 
All I have room for now are the smaller testers. Bet all of them go at Carlisle. Have a really cool snap on set I have to finish tach/rpm and ohms I believe two testers on a stand but this is my favorite and have two of them, one display only and the other works.
Then this one is super cool 1940's
View attachment 1715176328 View attachment 1715176329
That is a handsome unit and a deluxe tool for back in the 40's.
 
All I have room for now are the smaller testers. Bet all of them go at Carlisle. Have a really cool snap on set I have to finish tach/rpm and ohms I believe two testers on a stand but this is my favorite and have two of them, one display only and the other works.
Then this one is super cool 1940's
View attachment 1715176328 View attachment 1715176329
looks great Ray.
PM if/when you get a working load tester you want to sell me. Getting busy, not stopping in for coffee as often!
 
-
Back
Top