No brake lights or rear turn signals

-

GreenVal

New Member
Joined
Jul 12, 2018
Messages
1
Reaction score
0
Location
Los Angeles
Hi,
64 valiant wagon v8
Front blinkers, reverse lights, and tail lights all work fine.
Rear blinkers and brake lights were working, but all of a sudden stopped.
The fuses are all good and both filaments in bulbs look fine.
Any suggestions/help is greatly appreciated.
Thanks
 
I'm not an expert on MOPAR wiring, but if the front front blinkers and tail lights are good I'd be looking for a broken wire.
 
I'm not an expert on MOPAR wiring, but if the front front blinkers and tail lights are good I'd be looking for a broken wire.
I didn't catch that part. Your right if the front is good, it has to be in the rear harness. It runs down the left side inside. Should be a plug there at the left front kick panel, unplug it there and test the harness at the plug with a test light.
 
Access the switch and test for power at the wires leading to the rear. IF you have not done so, go to MyMopar and download a shop manual and or wiring diagram. It is likely the TS switch itself
 
-
Back
Top