[SOLD] RMD/Peak Dash

-
Status
Not open for further replies.

Tsully

Well-Known Member
Joined
Jan 25, 2017
Messages
765
Reaction score
854
Location
The United States of America
Rating - 100%
12   0   0
Contact seller
RMD or Peak Dash for sale...not sure which as it doesn’t have any identifiable marks or stamping on it. After research I’ve discovered that RMD was bought by Peak and used the same jigs to build there’s also.

I know these are getting more difficult to come by...I test fitted it in my 69 Cuda and it fits great. Previous owner painted it and I started to strip it, but decided against it. I also test fitted my aftermarket gauges and they fit great as well.

Asking $800 plus shipping.

Located in St George South Carolina 29477.

73502998-3303-46E7-9C67-1C502A853F21.jpeg
974564E8-C06D-4742-89F7-B9AB21A68D7D.jpeg
26FA8C99-DBF2-448F-BE6B-AB7C1F137DCB.jpeg
5D049FE8-DDAA-44A8-A486-A403D5E00D4B.jpeg
80BD88DB-D43C-4BD8-9158-CE3C7DEFDAEB.jpeg
B33257A0-0CB2-417F-B0E2-D88A0CE2D2F3.jpeg
A7D4F9A6-A53A-4DDC-9680-29EDEE25237B.jpeg
 
does this insert into the standard dash frame or does it completely replace it?
 
I redid the original first and then I happened upon this RMD one .... the more I thought it over...the more I liked the original look.

I’d even be willing to trade it for other parts!
Id like to have it but don't have an abundance of parts left, and mostly stuff for a big block.
What are u needing ?
 
I thought you had to cut it where the radio and controls are.

Thanks Riddler!!! Good to know!!! Now I can possibly sell or trade this thing... :thumbsup:

If your doing this dash, typically a little cutting isn't an issue. However I believe this will still work right overtop of the original.

Riddler
 
There was some trimming involved in the guage area on my 69 Dart. Also it did not have a 3rd hole for the 4 way flasher switch just headlight and wiper switches. Very happy with mine
 
Status
Not open for further replies.
-
Back
Top