Stop in for a cup of coffee

-
I know good, this ain’t it!
:lol:
On a positive note, the cam and lifters look good to me!
:thumbsup:

18C6DB49-505A-4AB7-B1E0-59C0A8A57D09.jpeg
 
dukeboy_318 said:
I don’t have my glasses on but are those rocker shaft holes oblonged?
Click to expand...
Why yes, yes they are! Except for the bottom right, that one is round and looks new. The funny thing is the one that failed looks like a new one also. I forsee rollers in my very near future.
 
MomsDuster said:
Why yes, yes they are! Except for the bottom right, that one is round and looks new. The funny thing is the one that failed looks like a new one also. I forsee rollers in my very near future.
Click to expand...
Yeah or even Crane ductile ones. Which is what I plan to run.
 
MomsDuster said:
Why yes, yes they are! Except for the bottom right, that one is round and looks new. The funny thing is the one that failed looks like a new one also. I forsee rollers in my very near future.
Click to expand...
So they failed in slightly different ways.
Well it doesn't seem to be a matter of oiling. Either spring pressures or running out of room...
 
Mattax said:
So they failed in slightly different ways.
Well it doesn't seem to be a matter of oiling. Either spring pressures or running out of room...
Click to expand...
What do you mean by running out of room?
 
There seem to be 2 different rockers, most likely original and a few new. My guess would be the builder couldn’t find all the original rockers and had to replace a few.
 
Was a nice evening out. Saw some people i havent seen in a while. Dinner was excellent. Music was great. All local talent.
They each do 3 tunes and move on. Should do it more often.
 
MomsDuster said:
Why yes, yes they are! Except for the bottom right, that one is round and looks new. The funny thing is the one that failed looks like a new one also. I forsee rollers in my very near future.
Click to expand...

Mark,

We can still take a look if you wish, just send them out. Up to you.
 
Was thinking I’d send the one that crapped out and one of the “new” ones for comparison, considering they seem to be of the same brand and markings.
 
Sounds good. I will keep an eye out for them. Send tracking when you have it.
 
Unconventional said:
'72 D100 short bed weighing in at 3500 lbs. Does that sound right?
Click to expand...

My son is looking for a pick up truck... He found a 73 Dodge extended cab for sale that he's going to look at when he gets to NC next week... It looks nice in the pictures...
 
You must log in or register to reply here.
-

Back
Top