2019 summer race.... Jadaharabi vs 318willrun

who's got this race ?

  • J par - hard to beat a guy that has 4 of everything

    Votes: 6 12.5%

  • Jadaharabi - are you kidding me? this guy is working on a stock eliminator

    Votes: 23 47.9%

  • 318willrun - no plan, other than brain cramps thinking of one

    Votes: 19 39.6%
  • Total voters
    48
-
318willrun said:
I'll laugh with you if i do.... :D
Click to expand...
The funny thing is is I finally found a hood for $50 to cut a hole in and it turned out to be better than my original and so I got the hool in my original hood.:rolleyes:
I just blue taped it out and cut a small exploratory hole. You'll be fine...
 
Are you filming a how to cut a hole in your hood video? It could be costly to try it again for video sake...
 
j par said:
What kind of scoop? Are you going to center it with the car or with the engine?
Click to expand...
Dual snorkel - like the '72 Demon came with...…. Yes, it will be centered with the car, not the engine. The HOLE will be centered with the engine.

j par said:
Are you filming a how to cut a hole in your hood video? It could be costly to try it again for video sake...
Click to expand...
I don't know about a video...… LOL. But I got the Mustang bearing in, so on to the scoop!!!!!!! :D
 
Jadaharabi said:
Ok drill the heads and use the stock intake on the magnums with the stock valve covers. It will look stock then.
Click to expand...
Iv been doing some research on magnum heads and la intakes. From my research drilling the heads is most definitely the most economical option. I read that Hughes will do it and read that others have had it done for as little as 80 bucks. Is this something you can do yourself?
 
I'm taking a quick breather. It's hot, I'm sweat'n, but things are getting done! I get 3 things from this. First, I like the look! Second, when I shut the car off, the heat will have another escape route. Third, when it's running, I'll have fresh air coming in. :) Hey, I just hit a triple :D
 
What I'm doing at the moment.


15648652044401638819168.jpg


1564865257049-518780688.jpg
 
Well crap. Here I thought I had made more progress then Jabs, and he goes and posts pics. Looks like he has 4 tires with air, I only have 3... He spins the car 180, I have to go 90... And he has an empty engine bay. I still have to pull a good running 318. LOL
 
Ok, the scoop is on, I like the look, but it was a pain. PERIOD! These ebay specials fitment is terrible. Had to file the centers to get it close to laying flat. Bolt holes go in at a angle meaning you have to oval the drill holes. But, I won. I won...….

DSCN2087.JPG


DSCN2088.JPG


DSCN2089.JPG


DSCN2090.JPG
 
Looks good buddy! That should bring in a tone of cold air! You should have when with a hemi scoop. I like the looks of yours better but the hemi scoop would have to bring in more air.
 
j par said:
LOL also I say you lose a 1/2 of a 1/10 from wind deflection LOL...:poke:
Click to expand...
Hoping to gain .0000012 - forced air at 100 mph!!!! LOL... Perhaps one of those K&N top breathers so the scoop pushes in the top where it's pulling.
 
You must log in or register to reply here.
-

Back
Top