[WANTED] HOLLEY 1 Barrel 1920

[themoparman73]

Looking for a good running 1 barrel carb for my brothers /6 dart. Something that he can slap on and go.

Thanks FABO

 

[shittyslant6]

Looking for a good running 1 barrel carb for my brothers /6 dart. Something that he can slap on and go.

Thanks FABO

in all seriousness, those 1920s are just not good carbs.
I had to rebuild the one on my slant THREE times in 4 months.
the foam or whatever material floats just disintegrate after sitting for a long time and clog all the oraphaces in the carb. (inside the carb was orange every time I opened it to re-re-rebuild it)
the float bowls and the actual carb bodies on those warp too if someone along the line overtightened it. On the last rebuild of mine I had to buy cork gasket sheet and make my own super thick gasket and put a lot of silicone sealer all over it. (DON'T DO THAT. I knew it was totally mickey mouse and wrong when I did it but it just had to make it to one show and back, I swapped the slant out 3 weeks after that)
So just buy one new. it'll save you a lot of hassle and time.

 

[Ronjon]

Looking for a good running 1 barrel carb for my brothers /6 dart. Something that he can slap on and go.

Thanks FABO

Rock auto sells rebuilt for $147 + core
More Information for AUTOLINE C7066

 

[halfafish]

I think I have one, I'll check the shop later tonight. Full disclosure, I never ran the carb as it came on my dead truck when I bought it (bad timing chain). I loaned the carb to another stranded member who was traveling through, and it worked well enough to get him home where he mailed it back to me. Shoot me a PM if you're interested.