Question on port matching

-
Status
Not open for further replies.
Rat and the official are basically saying the same thing.
 
People will say a flow bench doesnt tell the entire story....

..Then turn right tf around and argue against fluid dynamics and their influence on power.

You better be sharp to get anything from this thread now...
 
Last edited:
This thread went full throttle suck.

Should sacrifice it to the server gods

If anyone gets anything from this...

The common/siamese wall in a small block head is thee most important to match to the intake manifold, period...oh and yeah drugs are bad mmkay yeah uh huh...lmao

Why always a mess in aisle 10...idk...
 
MOPAROFFICIAL said:
..Then turn right tf around and argue against fluid dynamics and their influence on power.
Click to expand...

So your flow bench tells you what the fuel is doing too.......Better tell Darin Morgan he's wasting his time with the wet flow bench and go back to his air flow bench.
 
Rat Bastid,
You can deny all you like & call me every name under the sun. None of that changes or reverses what you said. Stop making definitive statements & then a few posts later deny what you said.
With all the nonsense that you post, all it does is pegs everybodys' BS meter in the red zone...
 
Hysteric said:
So your flow bench tells you what the fuel is doing too.......Better tell Darin Morgan he's wasting his time with the wet flow bench and go back to his air flow bench.
Click to expand...
Some don't need a bench, the good ones can actually see the air and fuel flowing.
 
A lot of folks are getting side tracked from the original poster's question. Which was about port matching at the head/intake interface. Things such as runner volume/shape/CSA are another issue, touched on in post 179.
 
Hysteric said:
So your flow bench tells you what the fuel is doing too.......Better tell Darin Morgan he's wasting his time with the wet flow bench and go back to his air flow bench.
Click to expand...
You, dickhead, would argue how to push a turd out. Take your lunch box and go home asshole.
 
MOPAROFFICIAL said:
You, dickhead, would argue how to push a turd out. Take your lunch box and go home asshole.
Click to expand...

So that's a "NO" then to your flow bench telling you the entire story?

You make a patently false claim then get angry when you get called out on it.
 
I love the amount of assumption going on here. Hysteric only shows up when he wants answers, typical suckerfish.

Go learn it yourself and share.

You should be on the no post list until you share what you elude to know. We probably wouldn't be hearing from you though, huh..:bs_flag:
 
MOPAROFFICIAL said:
I love the amount of assumption going on here.
Click to expand...

Yeah your flow bench tells you everything about how an "Internal COMBUSTION Engine" is gonna run.

There's a reason people spent a fortune developing a wet flow bench and it wasn't to see what the "AIR" was doing.
 
Hysteric said:
Yeah your flow bench tells you everything about how an "Internal COMBUSTION Engine" is gonna run.

There's a reason people spent a fortune developing a wet flow bench and it wasn't to see what the "AIR" was doing.
Click to expand...

You think I get all I say from a flow bench, that's your flaw....always looking for flaws.

What's really wrong with you?
 
MOPAROFFICIAL said:
You think I get all I say from a flow bench, that's your flaw....always looking for flaws.
Click to expand...

You claimed that "your" flow bench told you the "ENTIRE" story......Sorry I assumed you had a decent grasp of the English language to know Entire means the "Whole" picture. You obviously have an alternate meaning.
 
MOPAROFFICIAL said:
People will say a flow bench doesn't tell the entire story....

..Then turn right tf around and argue against fluid dynamics and their influence on power.

You better be sharp to get anything from this thread now...
Click to expand...

Here it is again because you obviously can't remember what you say. Another YR ffs.
 
@Rat Bastid
RB, I wasn’t going to reply. (Running out of piss and vinegar.) I was asking you questions like I was a dumb *** know nothing about this topic person. Many people come here to read up and learn something. So your comment you made about “your not here to teach me.” Is a sorry full one since that now means others are included in your statement. Earlier you kind of made some insulting remarks. While I’m not personally offended, it was the reason I took the approach and it was a dip from you I didn’t expect.

You gave me (and the forum) a video. Here is mine in return that answers the question more than you did. The big problem here is you assumed and did so on a huge level.

First thing is when the OP asked the question, you assumed your answer was correct and it was, from a certain point of view. What was the OP’s point of view? What parts is the OP using? These and many more questions you don’t know the answer to but yet answered the question as if he was doing what you thought he was doing.

When I repeated the question of how much of an offset of mismatch there was, it was for a reason. Starting with what head and cylinder the OP intended on using. But you know what parts he has on hand to use right?

In the future, before you throw stones and get pissed off like a little girl and ask me to find where you made a statement that you think I said you wise or otherwise twist the words and meanings, take a breath and walk away to calm down.

You yelled at me that I should learn something first and not come back until I do. That is one awe inspiring show of arrogance of one’s high and mighty self. I have bad news for you, this and other forums are here to not only shoot the **** and brain storm between people that have been there and done that but also for others to learn something.

Please proceed to 1.31:00 of this video. And the. Again @ 1.48:00
After viewing, consider yourself schooled but someone a **** ton brighter than you, sent by a guy that new the answer.

So does this make Darin a Hypocrite?

 
Last edited:
Hysteric said:
Here it is again because you obviously can't remember what you say. Another YR ffs.
Click to expand...
LOL YOU DON'T UNDERSTAND MY STATEMENT! BECAUSE...YOU SEARCH FOR FLAW...AND MISS THE POT OF GOLD AT THE END OF THE RAINBOW LMAO.

I'm making fun of people 'like you' who will argue against your own beliefs if brought on by someone they have a grudge against.
How many threads have you danced & dodged answering nothing asked of you..6?
If you could only choose one or the other...which would it be.

Enlighten us with something other than sarcasm and baiting. Last chance.
 
Status
Not open for further replies.
-

Back
Top