[WANTED] Left Hand Thread Stud

[carbuff]

Need one left hand thread stud for left rear of my 1965 Dodge Dart GT. Also need a matching nut; see pic.

 

[cudamark]

Not a great photo.....is that a factory rally wheel lug nut LH thread?

 

[mvh]

I have some left hand studs, take-offs from the rear of a 67 Barracuda (7.25 rear). Check to see yours are the same length. I also would have a similar chrome lug nut.

 

[mvh]

Not a great photo.....is that a factory rally wheel lug nut LH thread?

That's what it looks like to me. I should have a set or two of those.

I converted one of my Barracudas to all RH thread. The other still has one wheel LH thread.

 

[carbuff]

Are they 7/16-20 much?

 

[mvh]

For sure a 65 would be 7/16-20. Mine are.

I see we have both styles of chrome lug nuts here... in post #1 it has a flat top (actually a shallow cone); in post #5 it has a longer truncated cone. I have some of both styles, though I am not sure how many of each are LH thread. There are also two hex sizes — some take 3/4 inch and some take 13/16. You probably want to check which size you need, as it's a pain having to carry two lug wrenches and it really confuses the tire shop (combined with the LH/RH issue).

 

[carbuff]

Whoever had this before replaced one stud only with rh.

 

[carbuff]

I would take a set or even two sets. How much to ship to me? I am in upstate NY

 

[cudamark]

Are they 7/16-20 much?

View attachment 1716376091

That looks to be an aftermarket lug nut.

 

[carbuff]

They are both the same; probably how I too the pic. The cone is slightly over 1/4 in and they are 13/16 hex.

 

[carbuff]

Overall height of the nut is 1 7/16

 

[carbuff]

You can send me a message mvh