[WANTED] 67 Barracuda motor mount brackets 273

[67cudamack]

Hi looking for a set of 273 motor mount brackets , one year only ,

 

[67valiant 100]

What makes them 1 year only?

 

[Syleng1]

What makes them 1 year only?

There for a 67 silly

 

[4spdragtop]

There was a thread recently that mentioned the 67 uniqueness.
@Cuda Al @mvh may know.

 

[Cuda Al]

There was a thread recently that mentioned the 67 uniqueness.
@Cuda Al @mvh may know.

Not to clutter up a wanted thread.

1967 only SB right side engine mount bracket vs 68-72

The 1967 right side engine mount bracket 2843224 is different than the 68-72 2863443 Both brackets will work and 273/318 from 67-72 but the 2863443 must be used on the 340. The only difference is the addition of a hole, otherwise the bracket is the same. Top 1967 The reason for this was that...

www.forabodiesonly.com

The hole on a 68-72 bracket could be welded in and ground clean, know one would know otherwise.
The left bracket is the same bracket from 67-72


Alan

 

[Deweywinger&howe]

I’d have em on a 67 273 but l won’t be home til tonight
Just like to have them in my sights

 

[67cudamack]

I’d have em on a 67 273 but l won’t be home til tonight
Just like to have them in my sights

Ok

 

[Deweywinger&howe]

Rather send it without the rubber mount

 

[grampscamp]

I have a set still on the engine

 

[67cudamack]

Rather send it without the rubber mount

View attachment 1716399282

View attachment 1716399283

Hi my 273 has 4 holes on the drivers side and three on the passgener side for the mounts .

 

[4spdragtop]

My 273 mounts have 4 holes, but only 3 are used. Drivers side 1st pic, pass 2nd.

Hi my 273 has 4 holes on the drivers side and three on the passgener side for the mounts .

 

[Cuda Al]

My 273 mounts have 4 holes, but only 3 are used. Drivers side 1st pic, pass 2nd.


View attachment 1716400180

View attachment 1716400181

Yes on the left, same for 318 through 72
The right 67 has 3 holes
The right 68-72 has 4, same bracket all small blocks (67-72).


Alan