Stop in for a cup of coffee

-
Icetech said:
If anyone is bored today and has a factor carb laying around, i could use an approx measurement from the trottle shaft to the cable stud.. i need to drill my carb close to get full throttle but am curious what the factory distance was..
Click to expand...
what factory carb do you need measured? I have a Poly 2-bbl, is that what you have?
 
abdywgn said:
what factory carb do you need measured? I have a Poly 2-bbl, is that what you have?
Click to expand...
no.. that would be perfect though.. i can't get secondaries on my current carb and need to drill a lower hole to fix the pedal/carb ratio.. just curious where the stock one is compared to the street demon.. and my car was a 2bbl poly so that's the perfect one
 
abdywgn said:
what factory carb do you need measured? I have a Poly 2-bbl, is that what you have?
Click to expand...
need from the shaft to the pin the throttel cable goes on

These are my amazing drawing skills
1746725794809.png
 
just looking at my setup.. might drill a lower hole and drop the throttle cable down so it's pulling at an angle up.. it's too high like this
2023-10-07 16.52.43.jpg
 
Tooljunkie said:
Definition of a pissed off dogView attachment 1716402634
Click to expand...
The dreaded “cone of shame” they just hate those. Our Shepard can completely destroy one and shred the house in the process in just about twenty minutes or so post medication wear off. We have to keep her doped up or it is destruction unleashed, nothing is safe, couches get moved tables overturned it is ridiculous.
 
AMC Diplomat said:
Maybe an old wash tub would work as a guard?
Click to expand...

Sublime one said:
Our daughter who is a non smoker non drinker carries a yoga mat with her everywhere she goes, super healthy young girl mid thirties mom of three was forced to take Covid shot for her job in education. She had a stroke as a result. I visit her in the heart rehab ward expecting to see a bunch of old farts like us and was shocked to see 80% of the ward was young fit looking under forty years old patients. Only thing they all had in common was they all took the shot. It really pissed me off and does to this day. All I am going to say on that but draw your own conclusions.
Click to expand...
We were all Guinea pigs for the shot
 
Sublime one said:
Our daughter who is a non smoker non drinker carries a yoga mat with her everywhere she goes, super healthy young girl mid thirties mom of three was forced to take Covid shot for her job in education. She had a stroke as a result. I visit her in the heart rehab ward expecting to see a bunch of old farts like us and was shocked to see 80% of the ward was young fit looking under forty years old patients. Only thing they all had in common was they all took the shot. It really pissed me off and does to this day. All I am going to say on that but draw your own conclusions.
Click to expand...
Did she recover John ? Hoping she is ok !!!
 
Sublime one said:
Our daughter who is a non smoker non drinker carries a yoga mat with her everywhere she goes, super healthy young girl mid thirties mom of three was forced to take Covid shot for her job in education. She had a stroke as a result. I visit her in the heart rehab ward expecting to see a bunch of old farts like us and was shocked to see 80% of the ward was young fit looking under forty years old patients. Only thing they all had in common was they all took the shot. It really pissed me off and does to this day. All I am going to say on that but draw your own conclusions.
Click to expand...
Patty had to take it to keep her Job ( federal government) I took it to suport her. Two hours later I'm in the emergeny room, joints hurt so bad, still to this day my joints are giving me trouble.
 
Icetech said:
need from the shaft to the pin the throttel cable goes on

These are my amazing drawing skills
View attachment 1716402716
Click to expand...

Icetech said:
If anyone is bored today and has a factor carb laying around, i could use an approx measurement from the trottle shaft to the cable stud.. i need to drill my carb close to get full throttle but am curious what the factory distance was..
Click to expand...
Give me about 30 minutes, I’m heading to the shop now
 
Icetech said:
If anyone is bored today and has a factor carb laying around, i could use an approx measurement from the trottle shaft to the cable stud.. i need to drill my carb close to get full throttle but am curious what the factory distance was..
Click to expand...
I have a 4 barrel set up for an LA too I can measure
 

Sublime one said:
Joe Bonamassa is coming to town! Woo Hoo! He is one of my all time favorites. Tickets are 150 dollars? Last time I saw him I think they were 65 bucks, yes it has been a few years and the venue is pretty small this time fit for a waning star, but 150 bucks? WTF
Click to expand...
i love that he plays rorys guitar and it didn't end up in a museum...
 
K... car is in the air, exhaust off.. driveshaft out and i got hungry.. so done for tonight... and my rear wheels are WAY too heavy.. i wish i had gone aluminum
 
You must log in or register to reply here.
-
Back
Top Bottom