[WANTED] For 1965 Barracuda - interior A-pillar trim, rocker panel molding, trunk hinges, emblems

-
Status
Not open for further replies.

itsdiz

Active Member
Joined
Sep 4, 2015
Messages
44
Reaction score
52
Location
New Mexico
Rating - 100%
2   0   0
Contact seller
I am looking for a few small items to put on my 1965 Barracuda: A-pillar trim, plastic, goes alongside the windshield, need both sides. Passenger side rocker panel trim (not sure if they are interchangeable?) that runs from the front to rear wheel opening. As you can see, mine is broken off at the front fender; and hinges for the deck lid (trunk). Also need the Barracuda emblems for the front fenders. I have a pair from a '67 (don't have the fish, just the name plate) if you want to trade or? Photos attached for reference.

a pillar molding.jpg


RF rocker trim.JPG
 
I have several windshield moldings as well as a pair of very nice rocker trim with reproduction fasteners. I can’t provide any oics right now as we won’t return from Europe until July 10th
 
I am actually stripping a 64 and most is packed up for the Carlisle show. Let me see if I have the hinges out still.
 
I have several windshield moldings as well as a pair of very nice rocker trim with reproduction fasteners. I can’t provide any oics right now as we won’t return from Europe until July 10th
Let me know a price once you get back, thanks!
 
Rocker moulding looks like it had two screws in it and no on the hinges they are packed for Carlisle.
 

Let me know a price once you get back, thanks!
Thanks fir the reminder. We’ve been back since the 10th but being an old fart, takes me awhile to return to US time from European time

I have the rocker panel trim with the screw hole for both sides at the front and might just have the windshield trim. I can verify this stuff tomorrow or Tuesday after I return from delivering some high dollar air cleaners to another member
 
Last edited:
Status
Not open for further replies.
-
Back
Top Bottom