dibbons
Well-Known Member
I seem to remember some kind of plastic inserts that disintegrated into powder when I removed these moldings (photo #1) almost four years ago and maybe some screws also. The molding on the left has some window screen glued onto the small hole locations because I need to repair them with some two-part epoxy.
The holes in the interior body beneath the huge rear window are: one pair of approx. 5/16" diameter on bottom (photo #2 shows one hole) and another smaller pair holes of approx. 7/64" on the top (photo #3-hard to see because the smaller holes are in the shadows). Anyone remember what type of fasteners the factory provided in these locations? Thank you.
The holes in the interior body beneath the huge rear window are: one pair of approx. 5/16" diameter on bottom (photo #2 shows one hole) and another smaller pair holes of approx. 7/64" on the top (photo #3-hard to see because the smaller holes are in the shadows). Anyone remember what type of fasteners the factory provided in these locations? Thank you.