[Found!] ISO passenger side weather strip trim for '70 Dart - Canada

-
Status
Not open for further replies.

1MeanA

Well-Known Member
Joined
Jul 22, 2009
Messages
2,781
Reaction score
2,876
Location
Edmonton
Rating - 100%
2   0   0
Contact seller
Looking for a passenger side weather strip trim for '70 Dart (67-72 should be same - holds the upper weather stripping) in v/good shape. I could also use the drip rail trim for the passenger side in v/good shape (long piece and the corner piece). Looking for a Canadian source.

corner.jpg
 
if I’m correct you are looking for the channel that screws to the roof which in turn the roof rail weather strip is adhered to About an inch wide
It runs up the A pillar and above the door and rear quarter glass to the rear quarter
I have a few sets but sadly in the states - Pennsylvania
 
if I’m correct you are looking for the channel that screws to the roof which in turn the roof rail weather strip is adhered to About an inch wide
It runs up the A pillar and above the door and rear quarter glass to the rear quarter
I have a few sets but sadly in the states - Pennsylvania
That is the piece (2 pieces per side actually )
 
Someone should have that out where you’re at.
Shipping would be astronomical from where I’m located
I’ll locate them Mon/tues. For your last resort if you can’t find them
 
Someone should have that out where you’re at.
Shipping would be astronomical from where I’m located
I’ll locate them Mon/tues. For your last resort if you can’t find them
Yes I’m a little taken aback that I have to get these parts from afar. They made a ton of Darts. More than a few local guys have these parts but can’t bothered to sell some trim. A used mopar parts place down east is supposed to get back to me Monday but who knows. I may be in touch.
 

I believe I have the roof rail weather strip channel off of a 69 dart. Both pass and drivers side. Won't be able to access till the weekend. Let me know if you want me to dig out.
Thanks
 
Status
Not open for further replies.
-
Back
Top Bottom