Stop in for a cup of coffee

-
Speaking of fire. I watched a Smudge pot video on Facebook now I see them all. :BangHead:

:lol: Part of my the pre-apprenticeship in highway construction, I was only 14. 3 of those things to get going early on frozen winter mornings. 1 to warm the water pump for the concrete plant, 1 to warm the fill hose and pipe for the mixer trucks, most important 1 to warm the 30 cup coffee maker and the control room for the plant operator/father and his mixer drivers :lol:
 
Good afternoon all, more priming on the 63 today and now sitting back and watching primer dry.
Moving stuff around in the garage to make more room I forgot all about my favorite wall hanger and hit my head on it. :mad:

IMG_20251109_124731320.jpg
 
Good afternoon all, more priming on the 63 today and now sitting back and watching primer dry.
Moving stuff around in the garage to make more room I forgot all about my favorite wall hanger and hit my head on it. :mad:

View attachment 1716476558
Not that I "like" you hitting your head.. The nut vendor is cool
 
You get a chance to look inside the tranny's you just got?
I need to blast off the 60 years of crud before I open up the 64. I looked inside the 65 and it's in good shape. No debris in the pan

I might just go do that now Fred, since you mention. Today is usually house cleaning day, but I only have one load of laundry yet to fold.
 
I need to blast off the 60 years of crud before I open up the 64. I looked inside the 65 and it's in good shape. No debris in the pan

I might just go do that now Fred, since you mention. Today is usually house cleaning day, but I only have one load of laundry yet to fold.
Tomorrow is laundry day here and house cleaning if I don't change my mind and go block out some primer.
 
You're probably like I am and "Clean as you go" but Sunday is laundry, vacuum mop day..and usually when I add to the Goodwill pile and write letters
Yea I keep it clean as I go but somedays I just say screw it and like a little kid just make a big mess.
 

So, not sure if you guys realized, but i am using rivnuts and stainless button screws to hold my rear quarters on. Makes working on stuff so much easier. Just have the rear lowers to do. Tubs are riveted in, so they can come iut easily. My thoughts were cleaning and maintenance, along with future changes. Oh and I am body body work savy

20251107_152709.jpg


20251109_161034.jpg
 
So, not sure if you guys realized, but i am using rivnuts and stainless button screws to hold my rear quarters on. Makes working on stuff so much easier. Just have the rear lowers to do. Tubs are riveted in, so they can come iut easily. My thoughts were cleaning and maintenance, along with future changes. Oh and I am body body work savy

View attachment 1716476632

View attachment 1716476633
Amazing work Eric

You guys do some really cool stuff
 
-
Back
Top Bottom