Recent content by 321Scamp

Hey guys. This may be a dumb question but I am having a brain fart and can't think. My car has been sitting for a while. Was going to try and start it. Battery I know is dead, so put the charger on it to get enough juice to do something. My question is since I had my gauges out, I have to...

We went again this year. It's sad to see the lots that used to be filled with cars is now just parking lots. Has changed a lot in the last 5 years. Seems to get a little smaller each year. Still have fun every year and love our Mopars, just makes me wonder what the next year will look like.

Thanks Kernel. The only thing that is still attached is the wires. I have already disconnected the throttle cable and vacuum line to the unit.

Does anyone have experience with the wiring for a cruise control unit? I was looking under my dash and on the stop light switch there are 2 more wires. After chasing one of them down, I found it goes to the cruise unit. Wanting to remove it cause it wasn't working right the last time I drove...

Thanks! It is all steel except for the aluminum ring. Only had about 3 hours total in it.

So with work, going back to school to finish my BA in business management and a now 13 month old getting into everything, I have not been able to do much with the Scamp or get on here much lately. But I wanted to post a couple of pictures of my latest project I was able to finish. I made a...

I should mention the reasoning behind this thought. The factory harness now is all kinds of a rats nest and random plugs and splices. (One of which was from my doing)

Hey all.... it's been a long while. I am looking at maybe redoing the wiring harness for under the dash of my Scamp. Since I have removed the AC, will be moving my Pioneer head unit to the dash,and installing my aftermarket gauges. What is you guys thoughts? Should I go with a painless kit...

i am also running standard 360 champion plugs. think i should go a heat range colder?

Eddy 750

ok thanks i will mess with it tomorrow.

I am running a accel distributor to answer that question.

I forgot to add that after i smoothed it out at 2k... it was stumbling on the hit of throttle while cruising and was acting as if it was loading up. Which i guess it very well could have been.

Hey guy My 408 is having a bit of a miss. I had the initial timing set at about 12-14 but while driving at about 60 mph ( 2k RPM ) you can hear a miss. So I turned up the idle screw up to 2k and moved the timing till it smoothed out. Which made it at about 6-8. I running the vac advance...

I asked about that... since I bought it in May of 2011 they said they could not take it back... but they was going to give me 20% off a replacement.