Recent content by 70Valiant

I need at least four 7/16 ansten sprint lug nuts. These are for the aluminum slot wheels, mine are 5 on 4". Any one have any lying around you don't need? Thank you

Do you have the lug nuts too?

is the title lost, could one be gotten for it? In what part of PA are you located?

My 66 Dart GT convertable has 98,000 and My 77 Volare Wagon has 72,000

If he is giving you the entire super six, including the throttle cable bracket you only need a couple of other parts. Your present kickdown rod going to the trans can work. When I super sixed my 70 Valiant I used my stock rod going to the trans.

Police cars and taxis could be ordered with 727's, most everything else car wise have a 904

I would venture that the adapter is causing a vacuum leak. If it idles fine with the choke on then you are getting to much air with it off. Either the idle circuit is lean or you have a vacuum leak. There is no way the adapter plate or intake holes are causing that much of a restriction at idle...

I had headers and power steering on my 70 valiant, the #1 tube made its own clearance. With new motor mounts they fit no problem but my old squished ones allowed the two to meet on occasion.

A carter BBD flows 280cfm and the 1920 holley 1bbl flows 190cfm. I would think it is probably jetted to lean, or you have a serious vacuum leak. I have no experience with street demon carbs, the carter BBD would be a better choice. As for headers, I ran them for 5 years on my Valiant as...

All thinks equal my Valiant ran quicker with a 2bbl Carter BBD(16.35@83) than with a 465cfm 4bbl Holley(16.75@81), the Holley got slightly better milage though. I rebuilt and tuned the heck out of the Holley and barely spent anytime on the BBD. If you aren't putting in a big cam a 4bbl is a...

Hey I left you a phone messege, I need your street address so I can ship your parts asap. Phil

Pics are up in the for sale ad. Phil

I have an 8 1/4 carrier with 3.55's and a sure grip. I nicked (Ok gouged)the pinion with the dremmel cutting off the bearing. I would like to get $150+shipping. SOLD!!! I also have 2 different style dog dishes and 3 other style 14" hubcaps off of various A/F-bodies. All are sets of 4...

3800 pounds, my wagon with me in it weighs that much!! I would go with 3.55's but I have an 833od.