Recent content by 75Dart440

I have spent hours searching this forum! I have tried searching keywords also. I give up and I just need your help. I have a 75 dart sport. I put an A body correct 8 3/4 rear end in it. Now I am in the middle of trying to find the correct rim size for the rear. I want the biggest wheel/tire...

The pictures wont show up! I am having the same issue and would like to see how exactly you made it work.

Suggestions? Comments? Ideas?

So I just assumed that on my 1971 440bb engine the coolant leak coming from the exhaust manifold bolt holes was because the holes are tapped into a water jacket...NOT THE CASE!!!! I used a video scope to look inside the bolt holes. I found this (see pictures) on the first and last bolt holes on...

Yes I did. They are VERY close no matter where the cams are at. I've got a couple pictures to post here. The first one is the picture of it touching when it is jacked up with the wheel hanging down. The second picture is showing how close it is at ride height after i let the jack down-you can...

So i disassembled the control arms and switched sides today. As soon as i put the first one into place i thought... "This does NOT look right!" Correct me if im wrong but this looks backwards now. Check out the pic

So I got them installed and went to the shop to do an allignment. When i turn the adjusting cams to where the machine tells me to put them the passenger side control arm still contacts the side of the bracket/slot. I called PST and talked to someone in customer service. The guy said i installed...

ok guys so I went ahead and cut that piece out (see picture below). I installed and removed a number of times to get it just right so that I could move the control arm up and down full range of motion with no contact. sounds good right? So I put it all back together and when I started moving the...

Just bout the PST Tubular upper control arms for my 75 Dart sport. I started installing them to find that the front arm of the control arm is contacting/interfering with the mounting slot on the car. It doesnt allow me to bring the arm down enough to connect the ball joint. see pics below...

Is your profile picture with the 8" wide wheels and the 265 60 15? Cuz thats all im looking for. Just some chunky rear tires to replace the oem pizza cutters.

hey guys, I have a 75 dart sport hang ten. Just got a 440 running in it. I got an 8 3/4 rear end for an a body that I am rebuilding. Because the car is a Hang ten i dont want to tub it out (trying to keep it in original enough condition that i can sell it with original parts if i ever want to...

Has anyone ever seen an A body with a 440 that has power brakes? Got any pictures? How the hell is it done. Ive got one that has power brakes.. But cant get the power to the brakes... 14 hg vacuum. 8" booster. Pedal is Rock hard.

Im in Eagan MN. 75 Dart sport Hang ten. 440ci .30 over. 727 trans. Working on a rearend for it.

Where would i buy an installation kit? does that just include bearings or whats in it?