Recent content by chris_stevenson

How much for shipping of manifold?

is this still for sale

im sry what details did I not give? I'm pretty sure I killed my wire harness due to me not grounding out my box. the yellow wire I was talking about is the black wire with a yellow strip down it.

well I didnt run a ground wire from the box and it ran like that for idk how long, two years? maybe more. I ordered a wire harness and have a new box. I'll run a ground wire this time.

http://www.dippy.org/upgrade/ignition.pdf

oh and I replaced the box to see if that was it and nope its not.

well my question is has anyone ever had this wire harness kit go out on them? a while back my car was stalling out. I couldnt figure out why. then I had someone turn the car over for me and the yellow ground wire was arcing off one of my spark plug wires. so I moved the wires taped them away...

this isnt a question or anything but just friendly google information for those looking. mopar super shock leaf springs take Mopar Performance P4452987 - Rear Spring Shackle Bushings those are 1 inch bushings. not the 7/8. hope this helps those out who dont need to learn the hard way.

the trans cross member should be the same. I did the swap with a 904 and used the same cross member. for the engine mounts I used a converson kit. for the headers depends on the brand. tti is best. doug is good. and hooker is pocket book isnt very deep. they can be hard to put on. I will post a...

I never said he sells junkyard stuff. i just feel like after only being able to drive my one and only car I own for two months and then it doesnt work right anymore is beyond me. ive been having to borrow a car from my parents. I have two car shows I paid for that are happening in weeks. I dont...

a seal where? im not losing any fluid.

well I guess it doesnt matter. theres a local shop in redlands I can just walk in and get a trans. http://www.bobmazzoliniracing.com/shop#!/~/product/category=5915055&id=25304377 that will just be easier then to deal with someone back east. sucks that you people suggested this person to buy...

checked that and the band is fine. is there anyway that any of the clutch's has failed? its sticking in second gear now then releasing. I can down shift on my own fine to first gear but it'll be stick in second then release and shift normal untill I stop and out the car into p-r-n again. is...

what am I looking for? John cope the guy who built it hasnt asked if I would check the front band. am I looking to see if the front band is too tight? or too lose?

i got in touch with the builder of the trans and he thought it was the valve body. the valve body was swaped and im still having the same problem. 1st gear hang up for a long while then releases and will shift find untill I put the car into p-r-n. im going to be calling him back next their open...