Search results for query: *

How much for shipping of manifold?

is this still for sale

im sry what details did I not give? I'm pretty sure I killed my wire harness due to me not grounding out my box. the yellow wire I was talking about is the black wire with a yellow strip down it.

well I didnt run a ground wire from the box and it ran like that for idk how long, two years? maybe more. I ordered a wire harness and have a new box. I'll run a ground wire this time.

http://www.dippy.org/upgrade/ignition.pdf

oh and I replaced the box to see if that was it and nope its not.

well my question is has anyone ever had this wire harness kit go out on them? a while back my car was stalling out. I couldnt figure out why. then I had someone turn the car over for me and the yellow ground wire was arcing off one of my spark plug wires. so I moved the wires taped them away...

this isnt a question or anything but just friendly google information for those looking. mopar super shock leaf springs take Mopar Performance P4452987 - Rear Spring Shackle Bushings those are 1 inch bushings. not the 7/8. hope this helps those out who dont need to learn the hard way.

the trans cross member should be the same. I did the swap with a 904 and used the same cross member. for the engine mounts I used a converson kit. for the headers depends on the brand. tti is best. doug is good. and hooker is pocket book isnt very deep. they can be hard to put on. I will post a...

I never said he sells junkyard stuff. i just feel like after only being able to drive my one and only car I own for two months and then it doesnt work right anymore is beyond me. ive been having to borrow a car from my parents. I have two car shows I paid for that are happening in weeks. I dont...

a seal where? im not losing any fluid.

well I guess it doesnt matter. theres a local shop in redlands I can just walk in and get a trans. http://www.bobmazzoliniracing.com/shop#!/~/product/category=5915055&id=25304377 that will just be easier then to deal with someone back east. sucks that you people suggested this person to buy...

checked that and the band is fine. is there anyway that any of the clutch's has failed? its sticking in second gear now then releasing. I can down shift on my own fine to first gear but it'll be stick in second then release and shift normal untill I stop and out the car into p-r-n again. is...

what am I looking for? John cope the guy who built it hasnt asked if I would check the front band. am I looking to see if the front band is too tight? or too lose?

i got in touch with the builder of the trans and he thought it was the valve body. the valve body was swaped and im still having the same problem. 1st gear hang up for a long while then releases and will shift find untill I put the car into p-r-n. im going to be calling him back next their open...

I think it might be the governor valve sticking. which Ive read on here is common even for rebuilt trans. any one here know how to clean up that?

its really weird. park, reverse and neutral any time I put the car in any of those after it gets to temp its like a build up rpms get high then release then it will shift fine untill I put the car into park, reverse or neutral.

Im not at all sure what is happening. i check the kickdown linkage and the shifter linkage and even double checked them to make sure that they were working and or where they should be. even disconnected the kickdown linkage to see if it was that and no still having this new issue. the issue is...

when the trans was put in the first time Idid it myself. (refering to the old junk trans) it didnt look like that trust me.

heres the photo

Your not being rude trust me, your being honest.

https://www.facebook.com/photo.php?fbid=630033507042820&set=a.630033500376154.1073741831.100001085289871&type=1&theater idk how to post photos on here but yeah I looked at the old trans and well its worn down where the shaft sticks out that you push the converter onto. so it wore down the old...

okay I didnt see any photos with that but to be honest though that guy I bought from is just might be a ripp off person who sold me crap to begain with u know?

idk to be honest i think the guy I bought from just sold me junk and now i have good stuff. idk most likely he ripped me off. martin garcia was the guys name I bought from a year ago. the trans I got from him from the start was crap everything about that is crappy so Im hopping that this will...

idk it was leaking out alot of fluid. I did some photo search's online and something popped into my head that gave me an idea of what might be happening to the converter. every photo of converters I look at are the same but yet on the converter I have it has a spot on there on the bolt side a...

the shop said that there could be a crack of some sort in the converter that wasnt seen. they open up the valve body and it was clean. filter clean, just all around everything is clean. so bad converter. I went to a local shop and got a hughes 2500 stall converter for 294 being that the shop...

okay so what Ive read online, hughes is a good company and to stay away from tci, b&m, and boss hog.

they called me back and said that its the converter. they flushed everything the first time and did it again and said inside is still very very clean. they said that there might be a grove worn into the old converter that was missed before and that if I were to replace it and it would solve my...

its the same stock converter, well tomorrow its going to the shop hoppfully its nothing bad.

no Im not gonna junk anything. just frustrated :( 200? no shipping was 370.