Recent content by christineman

Not sure if this is the right place to put a wanted ad so forgive me if I'm wrong. But I'm looking for grill for a 66 dart if anyone has one to sell

Hey Russ. Just wanted to know. How did the 727 work out for u? Any problems?

I dont have one I can trade but if you want to sell it, I need one for a 354 to a 727 privately to moparmel@gvtel.com

Has anyone fooled around with putting 392 pistons in a 354? I'd lil Ke to get more power out ofba 354 and I was told that thatbwasbthe way to get it. Seems to me I'd loose comp. Thought about shaving the heads to get little more compression. If anyone has any ideas on what I can do letnme know...

you know,,, this site is the absolute best,,, thanks so much guys,,, Im sure it was simple to you but it sure helped me out,, thanks to all of you...if you guys ever need any mopar parts, Ive got over 600 parts cars.. bad part is that most of them are 56-61 but I think there is maybe 100 of...

the switch Im useing is a 58 plymouth switch,, I believe there is a ign1 and 2.. so where should 1 and 2 go to???

ok,, so on the switch, there is a ign 1 and 2.. so,, I need a wire from 1 to the resister and a wire from 2 going where?

im trying to wire a 440 in a street rod,, it willl turn good in the start position but wont start till i quit trying to start it and let the swith spring back to the on position.... if I direct 12v to the resister, she fires up right now... seems im not getting 12v to the resister while the...

I trying to wire up a 440 in a street rod,, It will turn good in the start position but wont start till I quit try to start it and let the switch spring back to on position,, If I direct 12v to the resister, she fires up immediatly,, seems Im not getting 12v to the resister while the engine is...

anyone give me some advice on wireing up a starter relay?? thanks chrisitneman

hey guys,,, need little piece of advice from the eiec dept... i dropped a 440 in a street rod and tried to start it today,, it turns good but wont start until I let go of the ign switch.. then it fires up,,if i hold ithe switch in the start position, it wont start, if I direct 12v to the...

can anyone help me with a PW switch for a 66 on up mopar??? please email me if you can,.,.. mel@moparmel.com

ive built a 360, and need a cam,, its bored .030, headers, factory thermoquad, j heads with 202s.< and will have 9.4 comp..... i need a cam for it that will give me all i can get and still be streetable for the wife to get groceries.. a laboring idle would be very good.. i need some specs...

ive got a 360 with j heads, 202s, its bored.030, headers, with factory thermoquad. i need a cam that will give me the most i can get and still streetable for the wife if needed... laboring idle is fine,, nothing lopy.. any specs from your past experiance would be appreciated...