Recent content by ConfusedMuchOfTheTime

Attached is a photo of what I have. You can see my car is a permanent vert atm as the top and rear window are rotted out. My frame is in good shape. I figure it wouldn't be too hard to build in the adjustments needed on non-headrest bucket seat back frames for headrests, a few internal frame...

Similar deal with me but most of the missing parts are attainable and interchangeable with Chrysler Australia models of the same era and of course eBay, Classic, RockAuto, YearOne Legendary etc etc. Tell you what though, finding these missing buckets and tracks is HARD but I have time as it's...

Aw, ok thank you.

Now I'm really confused ???

Hi everyone I'm looking for bucket seats for my '69 Dart as it came without. A pair of what are claimed to be '68 Barracuda buckets have come up locally minus the tracks; and are factory hemi fixed brackets which I'm not interested in long term. I've read alot about the inter-compatibility of...

@Surprise67GT I will do some research yes. Sounds promising. Could I bother you please to grab the front to back floor pan attachment bolt distance and across the diagonal measure too plus any pics would be great ?

Thank you @413 good to know and I see this now after a bit of research :thumbsup:.

Hi everyone I'm beginning the hunt for a pair of bucket seats for my LP27. They were very kindly removed before I bought the car. Given the scarcity of these things I'm willing to consider pretty much any condition and if not from a '69 then any '67/68 or whatever compatible track and internal...

Yep, bang on. You're correct as I was fast typing before getting on with today's work. Sorry for my error.:thumbsup:

So, the 3/8 UNC spec threads in nicely now with a bit more torque than my hand :) and some WD40. Weird though as all my research has come up with a 7/16 UNC for that hole and my 7/16 shank does not even bite the threads. Oh well, you live and learn.

I did slot a 3/8 UNC in there just to see and will try again with light tooling as only used my hand before. Def grade 8 7/16" x 14 TPI UNC Coarse Zinc Hex Bolts Part Thread High Tensile Grade 8 AS 2465. Looking around the web tells me the spec should be 7/16 but will fiddle around again.

Hi everyone I'll keep this short and sweet. Is the bolt circled a (2" under head shaft length) 7/16"-14 TPI UNC 7/16"-14 TPI UNF 3/8" -16 TPI UNC 3/8" -16 TPI UNF Asking because circled bolt I have (7/16"-14 TPI UNC) won't go into the bell-housing. Screwdriver pokes right into bell-housing...

Hey @6pk2goDemon this is great thank you. I was wondering why my '69 Dart Conv had no trunk light, glove box light, headlight on warning buzzer etc. I suspected the A01 light package (or lack of one) and this confirms my suspicion. Was having a hard time working it out from the wiring diagram...

Yes, it's really strange that I (and others) have not been able to successfully find this information about the springs or OE repops for the /6, but there are plenty of sources for any V8 block. Anyway, I'm happy to go off and source my own make do springs as this method seems to be my only...

Hi everyone 225 Holley 1920 1-barrel carb. What's the deal with these springs ? I need both circled in blue below (both are missing) but I can't find any info on specs or actually anyone selling them (Mancini/ebay etc) - no-one seems to care about the /6 when it comes to return springs. So...