Recent content by dbednarsky

did you ever find out the order? I have a 66 Dart and I am on the last stages of the restoration, and I am trying to get the headliner done so I can finish the interior. I have all 6 bows and a new headliner, but they have color markings and a few are different lengths. Hope you found the...

Putting my 66 Dart back together and I need the gaskets for the side glass. I have the Door Seals and the felt for the glass but I need the gasket that goes inside the channel on both the door and the rear quarter glass. Anyone know where I can get them, or if I can buy for another car and...

Hey all..... Got my motor and trans in the car and found a small (huge) problem. The hood doesn't fit :-( I put a 318 with the TF727 Trans, Holley Carb and Mopar Performance Air Cleaner (the black one with the brushed stripes). Seems to be about an inch or so to high. Anyone know of a...

Here is an interesting one.... I have a 66 Dart which I swapped a 318 into, and decided to convert to 4 wheel disc. I also is the Moser Hardened Axel swap in the rear, so I can have 5 x5 all the way around. In doing this I also ordered the full Stainless line kit, but the issue I am...

Ok so all the body work is done on my 66 dart. Everything is in primer and getting ready to lay paint. Here is my current issue. I put an 8 3/4 rear from a 68 Dart GTS in it, did a moser Axle swap and a disc brake conversion. Now I need to get some wheels and rubber. I placed the jack...

Finally getting ready to put the motor in. But here is a question. I need a radiator, any suggestions? 66 Dart with a 318 conversion..

here's a good one. On my 66 dart I have put in a 8.75 rear and looking to see if anyone knows what the biggest size tire is that I can fit back there. I am hoping for a 275/50/15 BF Goodrich Drag Radial TA. Any thoughts if this will fit? Thanks

Is this still available?

Hey guys, You all have helped me out with a lot of questions but here is one for the books. Today I pulled all my chrome down to mock it up and see what goes where and where all my lines are etc. My BIG ISSUE!!! I can't seem to find the lower chrome piece for the rear window, but I do have...

Thanks for the advice. I straightened the bezels out, used some mud to fill it, and painted them black. I think this should work with the paint scheme. Also the advice about reinforcing the floor pan is great, I didn't even think of that. Just need to get everything measured out correctly...

Anyone know where I can get the front headlight bezels? Mine are pretty beat up, and either I get NOS, Repop etc, or I have to straighten mine as much as possible, throw some mud on them, then paint them black. Any thoughts? Also if anyone has replaced the factory bench seat with buckets...

It came out of a 73 Plymouth Satellite

I am asking for help yet again. I am one step closer to getting this car on the road but here is my current dilema. It is a 66 Dart that had a Slant 6 in it. I am putting a 318 in there. I ordered the conversion from Year One which allows me to use the /6 K-Member but stuff the 318 in there...

thank you so much... I really appreciate it

I am hoping some of you can help. Does anyone have a complete list of what bolts are need for a 318 motor. It came out of a 73 satelitte and is going into my 66 dart, but I need to finish assembly, and want to get new hardware, some I already have the rest I am going to peice together. But I...