Recent content by Fishercuda

I did a little digging in the forums and haven't found any conclusive information so I'm hoping a fresh inquiry might lead to an answer. I've got a 65 Barracuda with a broken hinge roller (detent door hinges); the rest of the door hinge is in great condition. The driver side is always a...

Finally got around to working on it. The initial problem was the points and condenser. Should have been my first guess. Since replacing them, I've been trying to redial the carburetors fuel and air mixture. It still stalls occasionally, but not nearly as often as before. Now I'm getting...

Hi All, With the recent change in seasons, I've noticed the barracuda has taken up a habit of stalling after warming up when in park/neutral and occasionally when driving (50-60mph). I did a bit of searching from older posts and most responses seemed to be timing. However, I just recently...

Thanks for the responses. Thinking I'll go with the Noah cover from calcar. I was hoping to find something that will hold up in snow and ice as well, but hopefully that has all passed. This weather has been absolutely bizarre.

Wondering if anyone out there has a recommendation for a reliable car cover for A-Body Barracudas? I bought one recently as I no longer have access to a garage, but after the last winter storm, tore it to shreds trying to get it off the car. It would be nice to find one that is tailored...

Not a lot of progress today. Soaking in carb cleaner and removing deposits carefully with a wire brush. Will update when carb is back together. Thanks again to Abodybomber and sireland67.

No back firing per say, but I did have a load of fuel rocket out from the vent holes once. Plugs were dry, but had been sitting overnight since first pull. Did smell gassy though. Did not do a second pull after cleaning , reinstalling and cranking as I had to leave.

Abodybomber, set the float via sight window to just a trickle of gas coming out. Although, when loosening the top screw to turn the float needle gas is pouring out (this may be normal, though I doubt it). I put a new fuel filter on. Again filter fills up completely. No debris pulling into...

After searching the forums, I still wanted to posted this up as I haven't quite found the answer. A couple days ago I drove the barracuda to a friends house, no problems. Started up, ran smooth. I had to fix the turn signal relay as the previous one had burned out. I replaced it with the exact...

Thanks for the tip pishta. The full diameter from end to end looks to be 14 inches but from clip to clip on the back it's 13. So my guess is 13 inches. They came with my car but not on the car. I have 14 inch rally wheels so they didn't fit. Not sure what a more appropriate price I should be...

1965 Barracuda Guage Cluster - 150obo

Exhaust Manifold (clean).

Exhaust Manifold (with beautiful patina).

Intake Manifold. Debris on manifold edges is old gasket.

Dog Dish Hubcaps.