Recent content by Peter J Boncella

1) if my cam has a intake valve lift of .500 with a rocker ratio of 1.5:1 , my actual valve lift is .750? 2) if the max valve lift of a cylinder head is .700 I would need to get a cam with around .450 lift with 1.5:1 rockers? or would a cam that has a valve lift of .650 work? 3) do they make...

I cannot seem to get my trunk lid aligned, im hoping its not an issue with the 1/4s or tail panel. the passenger side fits ok, but the driver side is all sorts of fucked up, i can push it down to fit fine without the lock in, but once i put the lock in and have it lock down it sets all wonky...

I haven't gotten it

you're right, shouldnt have described them like that my fault

more photos barracuda tail lights - Google Drive

both are tinted, sorry

Came off a 69 Dart could use new ball joints and sand blasted/painted if you want them to look pretty. $90 obo can ship located in Lawrence KS 66049 Photos:

Dusty, but great shape just need cleaned up. $125/pair have two pairs. can ship, located in Lawrence KS 66049. photos:

In great shape, good shape, not perfect can ship located in Lawrence KS 66049 $200 obo Photos: (edit took out like new, they have a couple flaws)

$20 In good shape, no cracks just worn paint. Could use touching up. B5 blue I believe. can ship, located in Lawrence, KS 66049. see photos below. Photos: IMG-3334 IMG-3335

$200, In great shape no cracks, missing teeth, or broken tabs. I might have headlight bezels and fog lights for it too. can ship, located in Lawrence, KS 66049. see photos below. Photos: IMG-3330 IMG-3332 IMG-3333 IMG-3331

$85, in okay condition, cracked in a few spots, and a couple broken teeth. can ship, loacted in Lawrence, KS 66049. See photos below. Photos: IMG-3339 IMG-3336 IMG-3337 IMG-3338

(360 LA)My fuel pump stopped pumping so i took off the timing cover to see what was up and the fuel eccentric was loose and when I took it off to check it out, I found metal shavings all in the back of it. What could the metal be from, and do I need to tear down the engine and clean everything...

Yeah... I learned that is a bad idea yesterday, hoefully nothing is screwed up.

I did just put it together What do you mean oriented correctly? the oil holes on the shaft are pointed down. Is there like a left and right or something? This is the first motor i've built so im a newbie