Recent content by ram45red

I called yesterday getting prices and part numbers. Didn't ask about length. Got my housing out and measured it.It didn't add up . I'll call again later .

On Moser's website A body 8.75 with B body brake plates and drums are 28 inches long. must be a typo. I need to call a rep. there before placing an order with them .

What is the length from outside flange to outside flange on a A body 8.75 rear ? Getting ready to order a set of Moser axles for one .

Dirt hides and holds moisture behind shock and rusts the upper control arm bracket at the frame. Hard to find unless you remove shock and clean everything up .

When you get a break from the cold can you send me a picture ?

The frame is in good shape. The bracket rusted through at the frame where dirt settled and I'm sure over the years acid from the battery helped. I thought about grinding spot welds off and replace the whole bracket assembly from a donor car.

Trying to decide how to fix my rotten upper control arm bracket on my 63 Dart .Which is the best to do ? Replace the complete drivers side front frame rail,cut out and replace the frame section where the bracket is or get bracket pieces from Auto Rust specialist. Anybody have pictures of when...

Thanks everybody for the info .

Getting rid of some leaks on my son's 73 Dart Swinger and after removing timing chain cover there seems to be some slack in the chain. Where can i get a timing chain tensioner ? Part number ? We rebuilt this 318 engine some years ago with a new double roller chain and sprocket set .I think this...

Car will be more Pro Touring street car than a Drag Car but may see the strip once in awhile.Front suspension has been completely rebuilt and KYB gas shocks front and rear .Drives and rides fine but way too low in the rear. Has a mild factory 318 now but will be changing to a stronger 340 or...

Getting ready to replace the tired old 7.25 rear with a 8.75 in my Son's 73 Dart Swinger.Rear springs lets car sag bad in the back. What is the best performance spring to replace them on a small block ,auto trans ,street car ? Where is the best place to get them from ?

I'm trying to locate the passing gear / kick down linkage for a 74 Dart Swinger slant six auto trans. What years fit this model ?

In Box cleaned out .

In box cleaned out .