Recent content by @restorationrealities

Hello, I'm looking to put aftermarket gauges in my stock bezel for my 69 Formula S project, I also could restore current ones, but would like a trip meter, clock, and a tach in the bezel, want to keep all gauges in the stock bezel, nothing mounted elsewhere. Would love to see any completed...

Hello, looking for guidance on the best path to restore my wiper motor and assembly off of my 69 Formula S, either DIY or farming out. If sending out, I want to stay on West Coast as I'm in Washington State. There is supposedly someone pretty good in SoCal, but can't locate them Thanks in advance!

It is stock 8 3/4 rear end, the new axles do have a slightly different profile, think they brought the lug nut flange out about a 1/4" Thank for the info!

Stage 2 kits from DR DIFF

Looking for advice on wheel/tire set up for my 69 project Barracuda as I need to get it off of blocks and back to work on this thing! I would like preferably 16" or 17" wheels like on this black beauty here, also plan similar stance, a little more drop in the front though.. So what wheel and...

with the QA1 shocks, the bushing width is 1/4" narrower than the ones that came off the car, also the bushings are bigger in diamater which make the washers I have too big! Wonder if Qa1 has solution for thicker and smaller outside diameter concave washers?....or a source

Thanks! Forgot to note I'm using QA1 shocks, the bushing width is 1/4" narrower than the ones that came off the car, also the bushings are bigger in diamater which make the washers I have too big!

Just curious if you did end up needing extra washers for the rear to keep from bottoming out on the threads, and did you have to trim the washer to get clearance on the shock body? Thanks

Just curious if you needed extra washers for the rear to keep from bottoming out on the threads, and did you have to trim the washer to get clearance on the shock body?

Getting ready to rebuild my steering column and coupler on my 69 Formula S, have the OEM rebuild kit from Detroit Muscle. Any tips, advice or lessons learned would be appreciated, video would be awesome bonus! Also, curious if the white insulator at lower support and steering shift should be...

I do. I would like to send you a video of it so there are no surprises. Like I said, it is sound but ugly *** welds from factory I will get it to you tomorrow, please if you can email me ( no emails allowed in public forum thanks) Ed

Update: I know a lot of people were looking at my Lower Control Arms, they do have the tabs to mount a sway bay, I was suggesting/advertising otherwise. Please let me know if interested $100 thanks

Update: Axles and front spindles and brake parts sold!

sorry, the car did not have one, thus no tabs on the LCA's