Recent content by themudgician

Hi is your hood still available

hey guys i am trying to put all the pieces of this puzzle together to get this dart running. i have decided to go with a motorplate so i can run my external oiling and oil accumulator.i want to buy the right parts the first time so i figured i would ask u guys.it would be nice to buy one that...

well i got all my steering parts today, a centerlink for a big block 69 swinger a new pitman arm for a big block 69 swinger and a idler arm. went to slide the pitman arm on and it was sloppy as heck it is the same size sect as my ps 74 box. i thought all 69 manual boxes were small sect i bought...

dang i already bought 69 style drag link and pitman and idler arm. thats just my luck oh well

thats what i am wondering if it needs all that extra oiling. it would be alot easier if i did just run the stock set up. i just want to make sure i dont need the external oiling so i thought i would get some opinions on it before i did anything. thanks

ok thank you

ok guys i have a 74 swinger that has power steering and i bought a 72 manual box from a demon and the steering adaptor from mancini racing. i bolted it all up and when i put my pitman arm on the manual box from the 74 it was way to big for the splines on the manual box. the 72 pitman arm the...

i currently have a muscle motors oil pump cover on my 512.one line is a external oil line and one line goes to a oil accumulator. this engine i bought built already from rm competition it was featured in mopar muscle magizines 2009 amsoil dyno shoot out.my prob is i am putting this in my 74 dart...

do u remember the part number for that pump and what size oil line are u using. and what pick up are u using in the pan thanks

i build alot of 4x4 trucks and alot of them have splines on the shaft and then the yoke and joint u bolt on the rear end yoke. i thought maybe i could cut the yoke off the drive shaft that bolts to the trans and weld it to a drive shaft off a 4x4 and use a conversion joint at the rear end. thanks

hey guys i just bought a 79 dodge 4 door long bed 2wd with a 440 and a 727 so i was told, but i was under it and noticed the trans doesnt have a slip yoke it has a flange that the drive shaft bolts to. will i be able to use this tranny in my dart if i put a slip yoke on the rear end side of the...

hi i am looking for 2 good fenders for a 70-72 and i need big block motor mounts oil pan manual steerin box and colum, big block fenderwell headers for a 1974 dart and radiator. thanks

it ia a 400 block, 50/50 street strip use. im looking for a 650 horse . its going in a swinger

im ready to buy a rotating assy. i can get a eagle rotating assy for 1600 at my local shop not balanced and it is a 505 kit with a 4.125 crank. or should i get the 440 source 512 kit.its a 400 block. also im going to buy a set of victor heads, due the max wedge heads flow any better than the...

thanks i sent you a email