Recent content by Trey_Bo

well i put the 5 prong one on since thats what my harness appeard to take and the car wouldnt start? once i put the 4 pronged one on it fired right up? whats the difference between the two?

I bought a 73 dart that has had the ignition upgraded to the orange box. I took the wire off this box and found that my wiring harness has 5 holes and the box is only four. I have another ignition from a 76 that has the prong on the box for the 5th wire. Which box should i run and what is the...

okay so ive been thinking of how to fix my tranny problem and ive kinda started thinkong about a 4 or 5 speed coversion but im only 20 and dont have the financial backing for a tremec kit of anything like that so is there any donar car that is out there i can do a swap from? Or am i stuck with...

i havent been posting latetly cause ive been disscouraged in a sence. i just had my tranny rebuild not even 3000 miles ago and its acting up on me again and i just had to tear down the front of the engine due to the cam lobe for the fuel pump coming unbolted. ive had alot off disscoraging speed...

What size wheel and tire combo is that on the back i wanna go with a set up like that but dont know what the 73 darts can clear tire wise...

What would be a good choice in converter? I plan to do alot of street cruzing in it and also run it at the track. I was thinking about getting a aux. tranny cooler for it but i would still flush all the lines just to be safe. On another note i just picked up my parts for the rebuild. this is...

Is there anything else i should look into and get that will be worth while doing when the tranny is out? also if anyone has any advice that will make this easer on me......Im listening :profilel:

Okay sweet thanks guys. I didnt want it to be something i needed to know when ordering parts and such.....

Maybe its a turbo car and it means im spooled........ HAHA still dumb tho..............

Yeah it was on medfords CL. I took the tranny pan off the other night and it was about 1/8th inch deep with clutch material and the filter looked like a miror from all the metal shavings in it...... so i ordered a master overhaul/rebuild kit from napa today with a B&M stage 2 shift pack. Ive...

Bump! i could use some help here guys lol

I recently found this 1973 dodge dart swinger on craigslist for 2200.00. The ad said built 360 and TF904 so i decided to go look at the car. After some thought and alot of time crawling around the car i shot a 1500.00 offer which i thought reasonable, After about 20 min of thinking it over he...

A week ago i bought a 1973 dodge dart swinger with a built/transplanted 360 motor i looked at the block and the nubers cased into the drivers side are__4008830-360 and the passenger side has a large 6 in the rear of the motor and the front has 5-7-78 so from what ive read that means it is a 360...