Recent content by wesgriffiths

where is the best place to buy a crate engine. A friend of mine is looking to replace the engine in his 69 dart and is thinking about getting a drop in motor. Are the blue print engines from summit any good

Thanks for all your help. Looks like I need to do some more reading. My plan in the future is to put a coil over front suspension to free up some room and build a new set of headers

tti headers are 1 7/8 tube with 3" collector 18" long and hookers are 2" tube with 3.5" collectors 18" long

Collectors are 18" long on both sets, tti' s are 3" and the hustlers are 3.5"

what would be the best header for my car and motor. 71 demon 436 small block Indy top end 13.5:1 compression. Best time so far is 9.50@139. Last year I ran hooker hustlers with a 2" tube,over the winter I had the motor out so I changed to a set of tti w2 1 7/8 headers that I had and so far the...

Pmed you

any Canadian racers going to the Rocky Mountain Nationals at castrol raceway in Edmonton alberta

I run my 2 step off a switch on the shifter handle. I have it wired in line with my line lock to hold the car front rolling at the line. It may not be as consistent as having it on the clutch pedal but I've had very good luck and been pretty consistent. I started at 3000 rpm but had a bog so...

perfect thanks for the replies,they are at the tire shop now and I will get them balanced

I am installing new slicks on my demon(29.5/11.5w15) and just wondering what everyone's thoughts are on balancing them. It's seems there is mixed thoughts on balance or no balance. What is the right thing to do?

I have a set of 360-1 on my 436 that have had no issues. My engine builder and another friend both have them as well,and they have had issues with leaks in the exhaust ports

thanks for the replies. the car has run a best of 9.50 and would like to see a 9.4- so thought I would try a spacer

I'm looking at trying a carb spacer on my car. What is the best to use,four hole,open,tapered,and what size. My combo is a 2900lb demon with 4:11 gears and a power gluide. Motor is a 436 small block with a CNC 360-1 top end with a 1050 dominator carb. Do you think a spcer will help and what kind...

I have over 500 passes on a stock 23 spline. Car has caltrac rear suspension 10.5 slicks and I drop the clutch at 5000rpm every time,never had an issue with the trans only driveshaft and the 8 3/4. Now it have a chromoly shaft and a dana

I have a pair of fibreglass fenders for a 67-69 dart,these fenders are older but in good shape. Some minor damage but easy fix. Fenders are located in manitoba Canada,will ship anywhere. Asking $350 Canadian plus shipping. Not sure how to post pics but can email on request