Should have the truck done today. Just fighting me all the way for sure.
Stop in for a cup of coffee
- Thread starter toolmanmike
- Start date
-
Same here only 3am. Kinda dozed for an hour and got up.
One more night and the dog is back to Kansas City.
Talking care of an old dog is a lot of work at times.
Still over at Stan's??
That's what she says!
No Deans the local mechanic. He is across the street from me. Mopar guy also. Has a 72 Charger and also a GTX in work on a rotisserie right now.
Talked to Jimmy last night. He'll be over this weekend to hopefully get the car running smooth.
Based on what he knows of the car he said:
Spark plug set up is off one.
Spark plug end is not on right.
Points somehow are loose.
I told him it was probably either one or two. They are new spark plug wires and are a PITA to seed onto the cap.
Based on what he knows of the car he said:
Spark plug set up is off one.
Spark plug end is not on right.
Points somehow are loose.
I told him it was probably either one or two. They are new spark plug wires and are a PITA to seed onto the cap.
Check the points screw the can come loose in the mail, no lock washers on them. Your new dwell meter will tell that story.
I figured that why you might of just sent that to me.
And Jimmy being the old MOPAR wrench he is will know what the readings should be.
So i fired up my power wagon, discovered the fuel pump crapped out. They sure build crap these days. It only lasted 22 years
28-32 dwellI figured that why you might of just sent that to me.
And Jimmy being the old MOPAR wrench he is will know what the readings should be.
Get a refund! Bet you can get 10.28 back!So i fired up my power wagon, discovered the fuel pump crapped out. They sure build crap these days. It only lasted 22 years
‘32 chevy coming for a tune up next week. From 50 miles away.
Guy isnt happy with his local mechanics.hope its nothing major. Think some guy changed the umbrella valve seals.
Guy isnt happy with his local mechanics.hope its nothing major. Think some guy changed the umbrella valve seals.
Ray know you don't back read yesterday I read an article here in the "How to section" for restoring stainless trim.
I took the boot snap trim off around the back window and spent about three hours yesterday cleaning it up. Easy peasy!!
Went out last night and did the door trim runs front to back along the top edge of the door. Cleaned up in five minutes.
I could tell previous owner must of worn a watch with all the little scratches in the metal. Nothing on the passenger side.
I took the boot snap trim off around the back window and spent about three hours yesterday cleaning it up. Easy peasy!!
Went out last night and did the door trim runs front to back along the top edge of the door. Cleaned up in five minutes.
I could tell previous owner must of worn a watch with all the little scratches in the metal. Nothing on the passenger side.
Is it a custom or still a true flathead??
Ben Drinkin
Hey bartender!
coffee and freckles . Happy hump day.
Nice.
Whats every one up to? Think TJ has the best though. Me just want to finish the truck and get it back on the road.
Well, after two days, I am able to walk around, and not much back pain...So thats good...
Good to hear that Mitch.
Good to hear that Mitch.
Hot rod. If it goes easy i will charge my hot rod flat rate.
A photo of car on my hoist. That’s it.
Last one was the ihc towtruck.
- Joined
- Mar 17, 2018
- Messages
- 13,329
- Reaction score
- 30,255
I had to weld up a pontoon boat part for a guy yesterday. Finely crafted extruded "Aluminum type" substance. The Chinese guys added some kind of alloy to make it more malleable for extrusion. Rendered it on the edge of unweldable. Closer to pot metal than actual aluminum. Kind of like some of the old AMF Harley parts from back in the day. Customer was drunk and ran into his dock with the awning up. It was a total PITA. Good morning all.
3.7 earthquake this morning at 5:37 Dyersburge Tennessee this morning, just 60 miles away
Hey Mike what's shaking?
-
