Hey Skews, is that YOUR Offy?
If so, what are the port sizes?
If so, what are the port sizes?
Trick Flow Intake
- Thread starter skrews
- Start date
-
skrews
Well-Known Member
No, just snagged pics off google.
I ran a Porta Sonic back in the 1970’s. Back when low 11.80’s was fast.
skrews
Well-Known Member
What do you mean 11.80s ain't fast 
Freakin A! I ran the MP 12.0 set up in the street for a long time. Moved to the 11.5. Still quick in the early ‘80’s. It was totally awesome stomping new mud holes in those “Worked up Camaros and stangs” all the young bucks were getting “THINKING!” They were fast.
Wyrmrider
Well-Known Member
They were faster than their drivers
is there 2 versions of the port o sonic ? the one I have is a air gap version .
leblanc
member 2883
The Air Gap 7576 I have sure works fine but is likely discontinued too, it is about 15 years old it is a street version of the strip one I think.
That is an Edelbrock....
Yes, but no air gap version. The two versions were a Carter/Holley square bore or TQ carb pad.
Yes, but no air gap version. The two versions were a Carter/Holley square bore or TQ carb pad.[/QUOTE]
I have an offey single plane air gap I always thought it was a port o sonic . looks like it isn't
I have an offey single plane air gap I always thought it was a port o sonic . looks like it isn't
Got a picture?
I would love to see this intake.
I would love to see this intake.
I will get a pic tonight , I got it from a racer in the mid 90's he built a box around the runners to pack dryed ice in , I will get a pic .
That is the strangest thing I have ever seen. I would love to hold that in my hands as to get a really good look at it. Not harping on the picture, but some other angles would be awesome. The overhead shot is making my eyes twist. LMAO.
It kind of reminds me of the Holley Strip Dominator with the open area under the runners and carb.
yup its an air gap and looks a lot like my strip dominator but it's an offey for sure .
gzig5
Well-Known Member
Is that some sort of plenum box around the intake?
stixx
Well-Known Member
^^^^^^^^^^^^^^^^^^^^
gzig5
Well-Known Member
Doh!
360duster
Well-Known Member
hmmm, one year later and still no news regarding this intake.....sad. Any Information out there?
Michael
Michael
Brian Hafliger
Well-Known Member
They had to send back all the castings and start over at the foundry...will be late this year probably...
skrews
Well-Known Member
^^^ that sucks
-
