I swear...

-
TrailBeast

TrailBeast

AKA Mopars4us on Youtube
Joined
Mar 11, 2011
Messages
22,395
Reaction score
11,867
Location
Arizona
http://www.mopars4us.net/movies/junk.movI hereby swear I will never buy a Procomp (now speedmaster) product again.

Awhile back I bought a 2 stage rev limiter from them that had two dials for liminting hi/lo RPM's
They sent me a rev limiter that took chips, so I contacted them and they said they sent the exact part number I ordered.

Well. I looked it up again and sure enough the one they sent had the same part number as the one I ordered.
Problem was, the one I ordered had dials instead of chips (that were sold separately) so I sent them the picture of the one I actually ordered along with it's description right off their website that said "NO expensive pills,just dial the prefered RPM's"

They sent back a reply saying that they don't and never did have one with dials even though it clearly showed dials and even went into detail about them on their website.
Needless to say I was a bit annoyed, but they said to try and make it up to me they would send every chip available at no extra charge, so they did and I kept it.

Now to today.
I decided to give it a try in the car this morning and got it out.
I fugured I would start with the lowest RPM chips and make sure everything worked right before moving up to the 6k chips.

Guess what?
The chips don't even fit the unit.
The legs on the chips are closer together than the sockets.

F*** Speedmaster for good and forever.

Here's what I think of them, their service and their products.
http://www.mopars4us.net/movies/junk.mov
 
Last edited:
TrailBeast said:
I hereby swear I will never buy a Procomp (now speedmaster) product again.

Awhile back I bought a 2 stage rev limiter from them that had two dials for liminting hi/lo RPM's
They sent me a rev limiter that took chips, so I contacted them and they said they sent the exact part number I ordered.

Well. I looked it up again and sure enough the one they sent had the same part number as the one I ordered.
Problem was, the one I ordered had dials instead of chips (that were sold separately) so I sent them the picture of the one I actually ordered along with it's description right off their website that said "NO expensive pills,just dial the prefered RPM's"

They sent back a reply saying that they don't and never did have one with dials even though it clearly showed dials and even went into detail about them on their website.
Needless to say I was a bit annoyed, but they said to try and make it up to me they would send every chip available at no extra charge, so they did and I kept it.

Now to today.
I decided to give it a try in the car this morning and got it out.
I fugured I would start with the lowest RPM chips and make sure everything worked right before moving up to the 6k chips.

Guess what?
The chips don't even fit the unit.
The legs on the chips are closer together than the sockets.

F*** Speedmaster for good and forever.
Click to expand...
Well you know how it is, when it comes to business. They are always right and you are always wrong! Just keep spending money and be quite is their ideology!
 
Road/Rage said:
Well you know how it is, when it comes to business. They are always right and you are always wrong! Just keep spending money and be quite is their ideology!
Click to expand...

I was going to just sell this POS cheap, but after trying the chips that don't fit I'm glad I didn't bother with it.
That would have sucked if I sold it and found that out later.
It's going in the trash the next time I go outside.

On second thought, I'm going to beat the crap out of it with a hammer and post the pics. :D
 
TrailBeast said:
I was going to just sell this POS cheap, but after trying the chips that don't fit I'm glad I didn't bother with it.
That would have sucked if I sold it and found that out later.
It's going in the trash the next time I go outside.

On second thought, I'm going to beat the crap out of it with a hammer and post the pics. :D
Click to expand...
I like this idea! If you have a youtube account, you can add some dialog to the video and post it. That will give them some free advertising.:mob:
 
This is amazing. I'm sure the chineseos will conviince you that you "just bent the legs"
 
I had a set of Pro Comp springs on a YJ as part of a "lift kit".
Worst springs I ever saw!!! How do you mess up a leaf spring!
It actually accelerated on rebound so hard the tires would leave the pavement on potholes!!
And the only way the rear shocks would go on was upside down!!
That's when I gave up on them...
 
Stick with MSD. REMEMBER never be afraid to buy the best,you’ll never be disappointed. I have the dial type in my Barracuda and it works perfect.
 
TrailBeast said:
I hereby swear I will never buy a Procomp (now speedmaster) product again.

Awhile back I bought a 2 stage rev limiter from them that had two dials for liminting hi/lo RPM's
They sent me a rev limiter that took chips, so I contacted them and they said they sent the exact part number I ordered.

Well. I looked it up again and sure enough the one they sent had the same part number as the one I ordered.
Problem was, the one I ordered had dials instead of chips (that were sold separately) so I sent them the picture of the one I actually ordered along with it's description right off their website that said "NO expensive pills,just dial the prefered RPM's"

They sent back a reply saying that they don't and never did have one with dials even though it clearly showed dials and even went into detail about them on their website.
Needless to say I was a bit annoyed, but they said to try and make it up to me they would send every chip available at no extra charge, so they did and I kept it.

Now to today.
I decided to give it a try in the car this morning and got it out.
I fugured I would start with the lowest RPM chips and make sure everything worked right before moving up to the 6k chips.

Guess what?
The chips don't even fit the unit.
The legs on the chips are closer together than the sockets.

F*** Speedmaster for good and forever.
Click to expand...
Well there you go another fine product brought to you by
the Peoples Republic of communist China
 
Yeah, I'm done with Speedmaster too. They dicked me around for four months on a return/refund. Multiple calls and emails always ended in them promising to actually issue the refund, but no results. I finally got my money back when I did a dispute with my credit card company. Bunch of jerks.
 
When you talked about taking a hammer to it, The movie “The Office” fax printer scene came to mind.
6F467409-0256-4E79-8FAC-BA7BE0AB9EEF.jpeg
 
TrailBeast said:
I just got some, didn't you see the video.?:D
First time I actually laughed out loud about the whole thing.
Click to expand...
I thought you could use more water you look a little dehydrated, and water helps with stress :poke:
 
If others are like me they buy their junk on price only had both Mopar and GM distributors that worked but had problems
 
You must log in or register to reply here.
-

Back
Top