True Bracket Car vs True Street Car....

-
honestly one of my next project for the duster could possibly be air conditioning LOL...
LOL..... then cruise, power windows, rack and pinion, etc etc. Hey, maybe it's time for a Gen III Hemi. My son put his Scat Pack up for sale... :poke:
 
LOL..... then cruise, power windows, rack and pinion, etc etc. Hey, maybe it's time for a Gen III Hemi. My son put his Scat Pack up for sale... :poke:
No I just can't stand the heat anymore. It's been about seven or eight years now where the heat just doesn't do it for me...
I hate to put the weight in the car, but I have the slowest stroker on the internet so I guess it doesn't matter anyways LOL..
 
No I just can't stand the heat anymore. It's been about seven or eight years now where the heat just doesn't do it for me...
I hate to put the weight in the car, but I have the slowest stroker on the internet so I guess it doesn't matter anyways LOL..
anymore?? I couldn't stand the heat when I was a kid, or humidity I might add. I see you quote that a lot … "slowest stroker on FABO"... you should start a thread. "Anyone have a stroker in a A-body slower than mine? 12.5's" LOL... and see what you get... :D
 
I'm well aware of the physics that you're talking about but it's not as personified as you may think. I did just say that I'm very tight very slow corners you can hear it click or bind... Driving out in the country going around curves you certainly don't feel it and in town going around corners you feel at once in awhile but it's something you completely get used to. I'm well aware of the physics LOL...
Also it's a huge safety factor on those times when I do take it down to the track...

Yes, for yours, the tires are the limited slip. And you probably have gone strong enough. For a drag racer they make absolute sense.
 
My friends all have them in their drag race cars. What happens when you take a corner? What does that do to your tires, axles, and other rear end components? Maybe even further up the drive train. How many miles do you put on your "street" cars with a spool? I would never run a spool on the street. You guys can run race cars on the street, but would you run cross country through NYC in stop and go traffic for hours or going over the Rockies through switchbacks?

I live in a rural area with curvy roads. The car drives fine and I cant tell any difference from any of the sure grips I've had over the years. The only place I notice my spool is when turning short into a parking spot. So what if it scrubs the inside tire on a tight turn, a good clutch sure grip will too.
 
Yes, for yours, the tires are the limited slip. And you probably have gone strong enough. For a drag racer they make absolute sense.
Even though I have the slowest stroker on the Internet it's still incredibly fast to me and this spool just gives me much more confidence as it really keeps the car going straight under power..
 
Even though I have the slowest stroker on the Internet it's still incredibly fast to me and this spool just gives me much more confidence as it really keeps the car going straight under power..
Looks like I'm going to try a spool in the drag truck - for cost mainly. Sure grips are extremely high these days, and spools are cheap. I have a 3.91 w/spool coming....
 
anymore?? I couldn't stand the heat when I was a kid, or humidity I might add. I see you quote that a lot … "slowest stroker on FABO"... you should start a thread. "Anyone have a stroker in a A-body slower than mine? 12.5's" LOL... and see what you get... :D
No need for a thread... I know I have the slowest stroker on the internet and no one can take that title from me...
 
I drove a '69 barracuda on a 1000 mile trip with welded spider gears in a 7.25 rear end. Isn't that the same as a spool? I didn't have any issues.
Well, get to welding then, who needs a sure grip for the street, when you have a welder or a cheap spool.
I can't believe anyone would advocate using a spool on a STREET CAR.
600 hp at the tire and a 14" slick on the brake and a spool. LOL
 
I had my cousin buy a locker when I found one, and virtually ALL the gurus and whiz bangs in gym shorts said you can’t run a locker on the street.

After a week or so he said he forgot there was a locker in there. Once I got the car, I never once thought this locker sucks to drive. A spool isn’t much different.
 
My friends all have them in their drag race cars. What happens when you take a corner? What does that do to your tires, axles, and other rear end components? Maybe even further up the drive train. How many miles do you put on your "street" cars with a spool? I would never run a spool on the street. You guys can run race cars on the street, but would you run cross country through NYC in stop and go traffic for hours or going over the Rockies through switchbacks?

Like I stated if you KNOW how to drive there's no fear of running a spool..you drive to the track well if you race enough somehow somewhere something is going to break hope your not the goof:):) sitting there wondering how am I getting home,oh ya' I'll call my friend he's got a trailer
 
Just asking, because I don't know. Do both of your cars fall into the "True street car" meaning you could hop in on a hot day and go for a 1 hour cruise at 60 mph? Or maybe just take a 500 mile vacation in it? Or are they set up like a bracket car that happens to be "street legal". Big difference.
*By the way, so not to lose my original point was bracket racers give bracket racing advice to true street cars......
It appears you have found a topic as agreeable on as politics and religion, congrats!!.....LOL:drama:
 
It appears you have found a topic as agreeable on as politics and religion, congrats!!.....LOL:drama:
I could see this pot stirring subject from so far away I needed binoculars LOL....
Next the best spark plug to use or the best oil LOL...
 
I've had spools/lockers/good diffs, my favorite for a street/strip car is the TruTrac.

Spools wear the tires out way too fast on the street, they also contribute to car in the wall disease when you get out of shape at the track. Lockers had a tendency to pop and cause the nose of the car to occasionally twitch in corners.

With the gear style TruTrac, a car casually drives like it has an open diff which makes my drag radials last much longer. I can coast thru a u-turn on a two lane road, also far easier to push the car in the lanes by myself. Never a problem getting power to both back tires when you are on the throttle, but if you get out of shape the diff opens to help keep you off the wall.

Grant
 
Well, get to welding then, who needs a sure grip for the street, when you have a welder or a cheap spool.
I can't believe anyone would advocate using a spool on a STREET CAR.
600 hp at the tire and a 14" slick on the brake and a spool. LOL
Didn't say it's the best way, nor did I say I welded it. But I did drive it from Colorado to Illinois without an issue :)
 
It appears you have found a topic as agreeable on as politics and religion, congrats!!.....LOL:drama:
I always say, if a thread can make it to page 3 on topic, it was a success. Here we are debating spools when the topic was bracket car advice from bracket racers to true street cars.... LOL
 
Things have changed, since the 60s, when most, Muscle Cars, ran in the 14s, and 15s, and a 11 second car was considered a rocket. -- Now there's lots of cars, on the street, that run from the 9s to 11s, and never see a dragstrip. --
 
Things have changed, since the 60s, when most, Muscle Cars, ran in the 14s, and 15s, and a 11 second car was considered a rocket. -- Now there's lots of cars, on the street, that run from the 9s to 11s, and never see a dragstrip. --
totally agree. Different day and age nowadays.
 
I always say, if a thread can make it to page 3 on topic, it was a success. Here we are debating spools when the topic was bracket car advice from bracket racers to true street cars.... LOL
We went from converters to trailers to spools LOL..
 
Well IMO the parts used or what it runs at the track are not the deciding factors as to whether it’s a street car, a streetable race car or a strictly race only car. Anything goes as long as it has lights, turn signals, brake lights, horn, wipers and any exhaust short of open headers, could pass a safety inspection if there was one where you live (not talking emissions) can drive in stop and go traffic without loading up, or over heating and puking coolant like old faithful then pretty much the rest is just down to what you do or don’t find tolerable in a street car. I like loud, raw, bare bones minimalist, think: 62-64 factory light weight Max Wedge car kind of guy. Like driving around all giddy, amped up, adrenaline pumping......my kind of drug. :)
 
Things have changed, since the 60s, when most, Muscle Cars, ran in the 14s, and 15s, and a 11 second car was considered a rocket. -- Now there's lots of cars, on the street, that run from the 9s to 11s, and never see a dragstrip. --

Well if they never seen a track how is it they run those times..seen plenty of guys at the track bragging how they THINK their car will go 11's always get a good laugh when they run 15 seconds:p:p:p
 
Well if they never seen a track how is it they run those times..seen plenty of guys at the track bragging how they THINK their car will go 11's always get a good laugh when they run 15 seconds:p:p:p
I see plenty of fast cars driven to and from the track. It's not the same as when I was in High School, or even my 20's. Even though it's not my flavor, the Ebay turbos and new engine swaps have given a new meaning to the definition of fast. Example: a guy at our track cruises to track at 70 mph, then runs low 9's, and cruises it home. Even the "all throttle" folks have displacement and aftermarket parts availible to make 10's a yawn if ya want to spend some $$$ Yeah, times have changed.....
 
-
Back
Top