In stock. Dr Diff Offset Hangers

-
go-fish

go-fish

FABO Gold Member
FABO Gold Member
Joined
May 20, 2010
Messages
2,751
Reaction score
4,435
Location
Okla.
Finally! I missed out the last run of these so I’ve been watching everyday on his site.
Just a heads up. They sell out quick!
 
The same guy who measured the pulleys for us bought a set last Thursday or Friday. They are going quick.
 
I know a lot of guys run these with good results.

How do they affect handling? It seems like moving the springs in board would require higher springs rates or a stiffer sway bar to maintain the same roll resistance…
 
MRGTX said:
I know a lot of guys run these with good results.

How do they affect handling? It seems like moving the springs in board would require higher springs rates or a stiffer sway bar to maintain the same roll resistance…
Click to expand...


I would be interested in knowing how much handling is affected by doin the full inboard relocation that goes into the frame rails in the front. Shocks go more vertical than angled.
Dr. Diffs is a 1/2". I wouldn't even spend time on the thought. The shock angle barely changes. THat 1/2" probably has very minimal affect on handling but allows you to maximize tire without cutting any metal.
 
MRGTX said:
I know a lot of guys run these with good results.

How do they affect handling? It seems like moving the springs in board would require higher springs rates or a stiffer sway bar to maintain the same roll resistance…
Click to expand...

I've never not run offset spring hangers, so I can't compare it to a stock setup. I'd be willing to be there is no difference. Now, the 3" offset kit for a handling application may not be the best idea.

ax december 6.jpg
ax december.jpg
 
You must log in or register to reply here.
-

Back
Top