Oof, could Wiseco sell you one?
https://www.wiseco.com/product/auto/pistons/professional-chrysler-318-piston-4-100-in-bore-3/
looks like KAxxxxx is a set and 60xxxx are singles.
Ive been to several and SBP in a 15 is tough to find that is not Duster like with a huge dish and small backspacing. They are scarce, I ended up using an OLD pair from a Chevy II spec. Pretty shallow with a deep backspace for the lips they ran too. Wrong bolt pattern but a 5 on 4 pattern just...
IIRC the slotted stem hole with shark teeth retention are aftermarket. I think OEM was an oval stem hole and 4 rim clips on the back? Correct me if I'm wrong.
Stockton wheel used to make widened ralleys, website is down but still shows a number 209 464 7771. These guys took 14" centers and put 15 hoops on them for 15 5x4 Mopar rims. Im sure they could widen a stock 14" rim if they are still open.
Does anyone have something like this that opens when it gets up to engine temp. typically on the side of a Mopar rad or other smog rich application. Anyone got one or 2 laying around? Thread/temp doesnt matter as I can adapt. Thanks!
color or paint type (singe stage, laquer, flat, etc) is not an issue, just want a gallon of anything auto grade. Got any weird color old gallons left on hand? Let me know what you got and price shipped to 92780.
Those fluidampers seem heavy but it misleading as the donut doesn't really factor into the rotating mass. Also watch for pulley alignment if the face is not scalloped where the pulley mounts. Many early ones were flat and caused about a 1/4 inch pulley misalignment
I thought the standard link could be used if you use the 65 Barracuda brick style rubber isolaters, that are about 3.5" tall. I hear its close but works. Not the thin 1" ice cream sandwich looking ones.