Search results for query: *

  1. S

    How much would you pay for this 340?

    Yeah agreed…sounds like he’s negotiable but probably not that much… im gonna keep waiting… clean 340’s are getting harder to find in Southern CA… or anywhere for that matter!
  2. S

    How much would you pay for this 340?

    He did say they were J heads... He shared a photo of the number on the block but it's nearly un-decipherable...
  3. S

    How much would you pay for this 340?

    Found a complete ‘69 340 near me, but looks pretty rough. You guys think it can be returned to its former glory? As far as I know it's not seized, seller says it ran when it was pulled 6 years ago… still working with him on price, wanted to hear what you guys thought… What would you pay for a...
  4. S

    Replaced fuel pump, still not running…

    Thanks for everyone’s help… after fuel pump, fuel filter, ballast resistor and lots of carb cleaner, I finally checked the plugs. They were filllllthy black, so I got a new set threw them in, poured a large dose of fuel in the carb and it finally kicked over and kept running. I don’t know if it...
  5. S

    Replaced fuel pump, still not running…

    It was dying so fast it was hard to tell if it was dying as soon as I let go of the key, it was a really old ballast resistor and cheap to replace so I went for it, but no luck.
  6. S

    Replaced fuel pump, still not running…

    It’s seems it’s getting fuel… I installed a new clear fuel filter between the fuel pump and the carb and it’s half full of fuel
  7. S

    Replaced fuel pump, still not running…

    Hey FABO, so a few days ago I was gonna take my 318 68 cuda for a spin but it decided it wasn’t gonna start. Tank is about half full… I’ll pour a bit of fuel in the carb, it starts for a second then dies when that fuel burns up. I had a similar problem over a year ago… ended up being fuel pump...
  8. S

    Advice: Solid Roller or Hydraulic Roller for street car

    Interesting…What would be your recipe to do that?
  9. S

    Advice: Solid Roller or Hydraulic Roller for street car

    Are you running on a stock block? What year? Are you going with solid roller or hyrdraulic?
  10. S

    Advice: Solid Roller or Hydraulic Roller for street car

    You guys are amazing… thanks for all the valuable feedback. As a total novice when it comes to this stuff, i just don’t want to buy a hydraulic roller set up then wished I’d went solid… or vice versa. As you can see from some of my earlier posts I’ve been researching heads for a while now.. I’ve...
  11. S

    Advice: Solid Roller or Hydraulic Roller for street car

    Looking at trickflow heads for my very mild 318. My car is a street driven 68 barracuda, weekend car, gets probably 3k-4K miles a year if that… i definitely want some HP gain with this project, but not sure what the best route is. If I go hydraulic roller it’ll probably be less maintenance, but...
  12. S

    Machine shop/engine builder in Orange County, CA?

    Anyone have any recommendations for a machine shop or engine builder that knows Mopars in Orange County? I’m in Huntington Beach. Thanks!
  13. S

    HELP: Cylinder Head and Cam Suggestions for 318

    Thank you for taking the time to write suggestions. I had a hard time tracking down an LD4B when I was searching a year or so ago however after all my research, many people said the Weiand Stealth is nearly identical to the LD4B so that’s what I ended up with… I’m sure they are within a couple...
  14. S

    HELP: Cylinder Head and Cam Suggestions for 318

    Sorry about that, I cleaned up my mailbox, but it says your conversation is blocked... not sure how to unblock it?
  15. S

    HELP: Cylinder Head and Cam Suggestions for 318

    What's up guys? Hey so wanted to reach out to the experts here... I'm really wanting to wake up my 318 a bit. I've been researching a lot but wanted to reach out and see what you guys think. I'm debating on buying new heads and a cam to make some power, but I do have a set of old 587's that...
  16. S

    68 Barracuda Fastback build

    @yotah1 sweet build man! What are the specs on those wheels?! Those 5x4.5?
  17. S

    [WANTED] A-Body 8.75" Rear (In or near California)

    Please tell me more... narrowed to A-Body width? What process do you use to narrow them? Chop and weld or sleeved? Either bolt pattern? What kinda price range for a complete housing with gears, axles, brakes etc...
  18. S

    [WANTED] A-Body 8.75" Rear (In or near California)

    Anyone out there have an A-Body 8.75" Rear? I'm looking for one for my 1968 Barracuda. I'm in Orange County, I'll drive to pick it up if it's within a few hours. I'd even consider it if you're in Nevada or Arizona. Let me know if you have a decent one you'd part with. Thanks, Shane
  19. S

    EQ318B Magnum heads discontinued ?

    I do not have the heads yet.. a friend of a friend has a set that has never been used... I’ll have to find out if my 318 used flat tappet lifters or hydraulic roller... i’m trying to do this in my garage on my own with the engine still in the car... is this going to be a worthy upgrade...
  20. S

    EQ318B Magnum heads discontinued ?

    Can someone tell me... Do the CH318B's bolt right up to an LA318? Do you have to run different pushrods still? any other modifications?
  21. S

    Installing Headers on a 2nd Gen. Barracuda

    Haha wow, thanks for that post. Looks like one heck of a build... Hopefully I can get them in without completely pulling the motor! :) I heard the 90’s mini starter for the 318 is smaller than for the 360... Is that true? Are they rated the same as far as starting power?
  22. S

    Installing Headers on a 2nd Gen. Barracuda

    Hey guys, I’ve researched the threads but having a hard time finding a solid answer... I’m installing Dougs (D453) Headers on my mostly stock 318 (68 Barracuda). Seems most people install a mini starter but some have not depending on the header... Anyone know if I need to for sure? If so...
  23. S

    Install a Tremec T56 Magnum in your A-body

    Hey Todd, so the T5 kit i have from SST uses the stock bolt holes for their lower crossmember. I'd prefer if I could make it work somehow, just using your upper... After further reading, it sounds like your T56 kit uses the stock holes closest to the tunnel but then re-drill the outer holes, to...
  24. S

    Install a Tremec T56 Magnum in your A-body

    Thanks for the honest reply Todd. Still trying to figure out all my options, but one thing I'm thinking is maybe I could try your upper crossmember piece and see if it works with my T5... If it doesn't I could either send it back untouched, or try to modify it. Would you be open to selling just...
  25. S

    Install a Tremec T56 Magnum in your A-body

    Hey Todd, I am doing a T5 install... using a kit from SST. Their kit provides a lower crossmember that bolts into the stock holes, but their kit provides no upper crossmember and it has to be cut in order to get the T5 high enough... I was curious if your upper crossmember would work with...
  26. S

    [FOR SALE] New bronze clutch and brake pedal bushings

    Sweet! The clutch bushings are what I need most.. but if you have the full set I’ll take it
  27. S

    [FOR SALE] New bronze clutch and brake pedal bushings

    Hey ValiantOne, You still making these? I'm converting my auto 68 barracuda to manual. I have a stock brake pedal and clutch pedal but need all new bushings. Let me know if you have a set... thanks, Shane
  28. S

    [SOLD] Billet wheel adapters small 4" pattern to big 4.5" $80 set of 4

    Few questions...Will these bolt on with 7/16 studs? How thick are they? What is the centerbore?
  29. S

    What gears are in my 1968 Barracuda?

    That was my guess when looking at what was available... Was 2.76 the most common on auto 318's in 1968?
Back
Top