Search results for query: *

How is the hex shaft attached to the waterpump shaft? The impeller is in the vise and the hex shaft just turns. Do I have to hold the pulley?

Anybody know how to remove fan clutch and pulley from 5.2 Magnum water pump. I thought you turned the hex shaft, but I took the water pump off, put the impeller in the vise and turned with a gretbig crescent wrench. I just turns.

I bought Stanley-Bostich crown stapler from Home Depot. Cost me $38 to replace trigger assembly. I also bought cheapo brad stapler from HF for $15. It keeps on working. I bought 1/4" air grinders - straight and 90 degree. Can't wear them out! When I go back i'm going to get another straight...

PM sent

Quote from Mopar Action Tech Archives on A-body disc conversion: "your best bet is to just leave your stock “tee / switch” assembly unmolested and plumb in an adjustable valve in the rear line, as we’ve done in our swap." On further review, I have decided to go with the recommendations...

Anybody else? A little too high for me.

Anybody got a good proportioning valve for front discs, rear drums? I need one for a 68 Barracuda. Forget it! I'll find one somewhere else. I'm tired of the rude know-it-alls and junk dealers that stick their noses in other peoples' business when it is not wanted!

Sorry - I meant spindles were late-A unknown. They are disk brake spindles.

I guess I should clarify - I have bought the parts from here, ebay, etc. The upper control arms have new bushings and ball joints. the calipers are reman from ebay. The spindles are late A-unknown. The rotors and brackets are from who knows. Hopefully, they will all fit together! I'm getting...

I'm putting disc brakes on my 68 B'cuda. Most of my donor parts are the 10" rotors from a Duster. I'm putting on 14" wheels. I have a couple of questions . 1. If I have jack stands under the car and a floor jack under the lower control arm, do I have to loosen the torsion bars? 2. I plan...

Is there not anybody out there that can answer a simple question other than this irritating teenager?

Hey Valkman - Post those pictures you sent me! Best looking early Barracuda I've ever seen!

OK - Cool beans! So how about running outside and looking, come back and give me a configuration of the Freakin' hole!

Well - I thought that too. they make a grommet to fit the hole so I wanted to cut to match the grommet in case I find one.

I'm installing a 2001 5.2L Magnum engine onto a 904 trans. Can anybody give me the location, shape, and dimensions for the notch I need to grind in the bellhousing of the 904 to give access for the crank sensor? Thanks

I saw the 8 1/4 advertised on here from out of Texas . Problem is - how would you ever ship it? I think I'm going to put a wanted ad on CL for the 8 1/4 Jeep. Either with drums or discs. I'm really not to concerned about the rear brakes. I appreciate the replies.

A Jeep would be ok - except most of the 8 1/4 rears are snatched up by the Jeep people to replace the Dana's. There's no such thing as a FMJ Mopar in the wrecking yards. Pick-a-Part is all 90's up FWD. There are no Jeeps in the wrecking yards - most of them are converted into crawlers or...

I have a 68 Barracuda w/ a 7 1/4 rear end. I'm converting to BBP for front discs and my Magnum 500's. I don't like the idea of drilling the axle flanges for BBP. Let me say for sure, there are no salvaged Mopars in this area and I really don't need the strength and expense of 8 3/4. I looked...

I love it! Put a decklid style spoiler above the rear window and I'll buy it! I would paint it a different color so it doesn't look like a big turd rolling down the road! Red?

I'm interested in mirrors and antenna for 68 Barracuda. driver and pass. sides. I would like to try painting the mirrors black, so I would prefer them to be in bad condition as far as chrome. Leave the nice ones for somebody else. I would need good glass. I prefer a non-telescopic antenna also...

Got any part #'s on those? I'm looking for 10".

Big bolt

Thanks Redfish - I'm considering welding on some brackets for the sway bar while everything is apart. Seems I've seen some aftermarket brackets that bolt on? Maybe if I could copy that shape in some 3/16 steel and do some tack welds i would be in business?

I'm changing 68 B'cuda to big bolt front dics. So far I have control arms and spindles. I need dust shields, caliper brackets for 10" rotors, calipers, brake hoses, proportioning valve and bearings. I would rather go with a good used bearings than new, cheap China stuff. Will consider a decent...

I'm changing my 68 B'cuda from front drums to discs. So far I've collected the 73-up UCA's and spindles. I'm putting on 14" Magnum 500 rims w/ the 10" rotors. I'm looking at factory 72-down sway bar. So this means I mount the calipers to the rear? Is everything going to fit and what do I look...

PM sent

I'm currently looking at buying a sway bay on here. The seller advertised it as a 68 Dart at first. I would be putting it on a 68 B'cuda. So all is well. Then, someone points out that it looks like a 73 up sway bar. The seller is selling for a friend, checks with friend and verifies that it is a...

I'm interested. PM sent

PM sent

Nice console and good price! Good luck selling, not that you will need it!