Search results for query: *

What am I looking for when I drop the pan? I replaced the pan with a deeper aluminium unit when the transmission was installed less than 100 miles ago. I replaced the filter and fitted the Sonnax valves that allow the TC to fill in Park. Remaining fluid in the trans when I got it was dark red...

The Regulator supply wire should be blue, same supply as the blue out of the bulkhead. In your drawing, it is labeled "green". But the green on an isolated field alternator goes back to the regulator, which controls the field strength. My guess is that if the regulator is actually hooked up...

When ya have a few successful Burger Joints Lynsi Snyder, In-n-Out Burger

Yup, where atmospheric pressure has MUCH less effect.

Thru a Closed System

Yup, but a carburetor is much, much different. Persnickidy is what we call it.

There are really no "user friendly" headers for a Mopar. I wish I had better news. lol I will say the Dougs are the best fitting I have ever tried, have plenty of ground clearance and can support probably 500HP give or take. IMO, they are fairly easy to install, provided you READ and follow the...

I'm in San Jose. I have a notchback. I thought I remembered an earlier post about that car being in a front end collision. I'd be interested in that rear window trim but I have a couple sets already, just looking for a better set. I've sold a few of those sets at spring fling and they're a...

No sweat, those manifolds are pricey. Usually around $500 range, and we're used from 68-71 340's I believe. 72/3 also had them but they were different numbers. In my opinion less headache with manifolds vs headers. I'm doing same thing, 340 into our 67 cuda. Here's some glamours shots Good luck.

A couple

Couple more from today

Final round.

Hello 4spdragtop, that's something new to me , I will check out hipo manifolds , thanks for the tip. Best

He did. There was a staging debacle in the last round and they backed both cars out. @turbodart68 should have gotten the win. He was staged and on the transbrake for 9 seconds (we counted the time on my video) and the other car didn’t stage. But they had em re run it heads up 10 minutes later...

1st stage: Logano first, Buescher second. 2nd stage: Logano first, Blaney second. https://www.jayski.com/nascar-cup-series/2024-nascar-cup-series-all-star-race-page/

LOL, obviously rodents aren't too smart.

Got the tail lights, trim, and badges swapped out from the parts car. Not perfect, but much nicer than what I had! Good for a driver

I'll take it. Can you check shipping to 92263 Tavelsjo, Sweden for me. Do you accept Paypal?

WHAT??? That is stupid. Nobody I know would pay to go to that kind of a car show. Those have always been free for spectators.

Quite agree! But it is still an elec pump pushing the same fuel to the engine....

U need to replace the cooler in the rad. They plug up pretty good. A radiator shop can do that easily. Or find another know good radiator. Or boss the rad which u have already done. General Motors has a flush in a spray can that they have approved for their cooler flushes. I believe u use 2 or...

I wasn't able to either watch or record the All-Star Race today. I've found the race final results online but cannot find accurate information about what drivers were either leading or in second place at each of the three scheduled 'competition cautions' in the race. Can someone please advise...

So lets just forget modern cars also have very advanced EFI. Yeah, ok.

Truer words have never been spoken.

An electric pump does fix v/lock. Modern cars use elec pumps.....& the same fuel.....& they don't get v/lock. Pump needs to be mounted near the tank.

Yeah, but to do it on Just-One-Side of an Intake? That's a Hack.