Search results for query: *

That was hard to see

The TQ electric choke baseplates are different from other TQ's. You can swap throttle shafts around though. The 74 Ford 460 TQ has the electric choke also.

PM Sent!

Little better second round. 15 total

What is the best replacement steering coupler for a 74 Duster? I rebuilt the stock one and after 3000 miles, it's already a bit sloppy. I'm thinking I should go to a Ujoint style coupler. Any experience appreciated! Cley

The passenger should have the axle adjuster if you are not using Green bearings. If no Green bearings, put the driver side axle in first and torque the 5 nuts down. Then install the pass side axle-back the adjuster out if you haven't and then adjust.

It was a busy day. We started with the ford and finally the engine was pulled. After that was done I was able to at least get the seats pulled in the Dart. Tomorrows plan is to take them apart.

Give it a light tap. You will know if its solid or it might go in

So in preparation for a big event next month I have decided to throw up a shelter pavilion type structure. I am utilizing material I have on hand so it might be a bit ugly! I bet my shooters won’t care. Having a bit of shade on a sunny hot day can make a real difference. Or rain of course...

Especially amazing as it was a Michigan car it's whole life until I brought it to Kentucky.

Max Wedge scoop Tom

Where are you located in New York? I'm located between Buffalo and Rochester. I may be able to help you out. PM me.

Not the distance. I'm sure that it's not a crack

That should be easy to check and correct. It's the same as setting the gap on a set of points. Let the guy know what the gap should be.

Wow bet not many of those around

Amazing how nice floors and trunk look

If it has been sitting for awhile, sometimes just driving it will help it quiet down.

I have a 67 fastback. If i were to put one on, it would be a hemi hood. The tall one. I think it offsets the big booty i percieve them to have when looking at them (fastback) from the side (90*, perpendicular). If i had a notch......prolly 6 pk. Which do you have? Notch or fastback?

I read where you said the voltage at the coil is 6V with the key in the run position. What is the voltage at the coil when you are cranking the engine? It should be noticeably more than 6V. The higher voltage while cranking aids in starting the engine. You have essentially two circuits feeding...

Could you post the vin so it can be put in the 1970 dart swinger 340 registry in case someone tries to re-body it?

Well, the time has come to try to see if the Scamp will start. There's a lot of stuff I need to cut out of the factory harness before I rewrap it, but I'm wanting to make sure it runs first. The new Sniper wiring is all in and clean/wrapped. Also just have the vacuum lines temporarily installed...

Just increase the head bolt torque by 25% and the crack will not gap. :p

5:21 EST. Changing to #45 Reddick for pole, watching group A practice now. #9 Elliott and #45 Reddick for race .. :thankyou: done.

Remember.. WD40 is NOT a lubricant. A great cleaner, but a lubricant not...

TMM must have a bacon flavored bourbon on his List of Things to Drink Today :lol:

I’m pretty sure Popcorn can draw that good. And he poops outside.

Actually just had my first beer in over a month. Back around Easter, I was weighing in over 225. Decided once the existing supply in fridge was gone there would be no restock for a while. Between the beer and eating less, I am making progress. As of earlier this week, I am under 220. So I am...