Search results for query: *

Close to where Crow's was. Any of the same people? I know its a long time ago now, but they did good work, and always busy.

So been working on a remedy all day, dropped by Thompson Automotive in Peterborough, great father and son Mopar team that races. Challenger with Offy crossram! :thumbsup: . I called and asked if I could buy an old hyd rocker, he said to come look at his compressor and he'll dig out a rocker...

Sent you two pm replies on FBBO.

Its called the "vac-u-lock"

I'm not sure what you mean by "right of a Car". Anyway, you have two bare sets at $150 per set and one set with springs and rockers for $175?

Plus uncut bush

She couldn't find a booth so she's just pickin' out her seat!

and you are close by! What do you need for an A-body 9” spindle and hub (drum ok if still attached to the hub) ?

I have not heard from you so I guess that means your spare frame is not for sale. I was really hoping that it would be. When the left side of the top is resting on the windshield frame the right side is 6 inches above it and it is not obvious what is sprung. I have attached more photos of my car...

I can reach underneath the dash and grab the wire harness and pull on it then they will light but as soon as I let go it goes out again. I have no parking lights either. All fuses show good. Should I do the dashboard boggie and see if I can find a loose wire? Where would be the first place to...

Hunt's Machine "We Rebuild Engines"

I have loose spindles and hubs

The Mechanical and suspension are done. finish the Body and Paint and do what you will with the interior. * The Car is an original 340 California car “Black on Black” no ac * The Car is in currently in Southern Nevada

What is the source of shear load on the bolt in an exhaust manifold application? Considering the bolt is torqued to spec into a through hole with about .020" radial clearance, there should be nearly no shear or sideways force on the bolt, it's all in tension, no? Any force coming back from...

And I thought that we had the only one left lol Ours is an '88 2.2?

Down to the last 3 sets of 915 J heads 1 used set complete and right of a Car $175 with springs and rockers that look OK to bolt right on

Free Delivery in So Cal/So Nevada.

Down to the very last 3 sets of 915 J heads 1 used set complete and right of a Car $175 with springs and rockers that look OK to bolt right on. 2 sets Hot Tanked or Acid washed plus magged, and pressure checked. Valves and springs have been discarded ( We do not use them ). These are out of...

I took a little extra time on this job and ordered more electrical disconnects in 10 and 12 gauge wire so as I do projects if it doesn’t have a quick disconnect in-line put one in. I hate screwing around trying to unhook stuff like alternators and radiators when you can unplug things in seconds.

Free delivery in So Cal/So Nevada.

This is a OEM Big Block Rear Main Seal Retainer with bolts. #2128895 It is original, not a china knockoff. It fits the 350, 361, 383, 400, 413, 426w, 440, and 426 Hemi BB engines. It is in good condition, with no cracks or stripped threads. Just needs a good cleanup. $35.00. Local pickup, or...

‘68-‘69

Agreed if No I understand

Thanks looking forward to it :thumbsup: :thumbsup:

I bet I’ll get it in a lot quicker than it’ll take to get here. lol