Search results for query: *

Years ago it was a popular upgrade to buy a Viper cooling fan assembly, does anyone have an original mopar (Viper) cooling fan assembly they want to sell, new or used? Thanks, please send a PM.

I’m looking for a nice clean OEM set of Dana 60 rear gears with a 3.54 Ratio. I have a 4.10 set to trade if that will help anyone thanks! Send a PM.

Just in case anyone here has a 66/67 Plymouth B Body Satellite, Belvedere, GTX *******************selling as a set*************** *Bucket seats, (nice covers, no backs ) *Rear seat (very nice covers) *All (4) Door panels front and rear. (Driver Condition) I’m going a different route with my...

Does anybody have a set of 1967 A or B body Bucket Seat headrests they want to sell? Any color is fine by me, I can dye them. please send me a PM rather then replying below....I appreciate it.. thank you.

Does anyone know what this horn pad originally came on? It looks like it’s on a 67 recall wheel but it’s not an original as far as I know?...

Does anybody have a horn pad for the 1967 Plymouth “recall” steering wheel? I have a “dodge” one I may be willing to trade But would most likely just want to buy yours outright. Thank you everyone! please send a PM.

I’m looking for a set of exhaust rocker arms for a 426 hemi Engine, might be interested in a set of intakes as a spare. please only send a PM. Price, pics, thanks.

Wanted: Just checking if anyone here has a 1966 or 1967 Dana 60 complete drum to drum for sale? ( I am NOT looking for a 68-70 which is about 3/4" wider) thanks. Please send a PM with pics or any info. Closer to NY the better. But will consider setting up shipping if your able.

I'm looking for (2) 15x7 Mopar steel wheels, large bolt pattern please. The ones that accept the redline dog dish hubcaps. Please shoot me a PM. Thanks!

Looking to buy a 3.54 ring and pinion for a Dana 60 rear. Must be dated late 1966 or early 1967. Not interested in any other year or aftermarket gears. Please send a PM if you can help. Thank you.

I am looking for a junk, rusted, damaged, rotted, whatever!! :) #187 or #699 oil pan with factory baffles. I need to see if the two baffles are removable without damage and those are what I am looking for. Not looking to make my own or use the template for the 1-piece that's floating around the...

Sale or trade: Selling the cam and lifter set that was used to test run an engine. The customer installed a blower setup and swapped cams. Yes this has been run, but technically has no miles on it and still looks new. This is a mechanical cam and the solid lifters ARE labeled to the exact lobe...

Does anyone here have a nice 70/71 style big block 383/440 exhaust manifold heat stove? Same for B & E bodies... Please send a PM.... Pics please? Thank you.

Please send a PM with what you have? I need some 14" plain old steel wheels, 5.5" wide large bolt pattern. Price shipped to 14304 NY. Thanks guys! :burnout:

Send me a PM if you can help, with shipping to 14304 NY. Need plain old 14" x 5.5" wide (large bolt pattern) steel wheels. Thanks. :burnout: 1...2....3......4 whatcha got?

Selling a 14" small bolt pattern 4.5" wide mopar steelie. $40 Matching original vintage Goodyear Polyglass D78-14 cushion belt tire, VERY nice $25 Picked up in Niagara Falls, NY 14304 please send PM if interested. Thanks!! :burnout: Will be listing the 15x7 Steel wheels and 14" magnum/road...

Selling a pair (2) 14" Rally wheels. Good shape for driver or strip/paint for show. Currently has a pair of VINTAGE Kelly Supercharger tires, good tread, with tire nubbies still. Disclaimer:: I do not know the rubber tires past history & I would NEVER recommend driving on a vintage tire! Even...

This is the trunk spare from my 67' fastback. 14" small bolt pattern steelie. Has Goodyear D78-14 white stripe tire. Tire still has nubs, very nice combo. $100 located in Niagara Falls NY for pickup. Send PM if interested, will trade for decent redline center caps....

Here is a decent pair of 14" rally wheels, center caps, & trim rings, they have Kelly Super Charger tires P245/60/14's on them. Tires look good! They still have the nubs on them! $225/firm picked up in Niagara Falls NY. Not interested in shipping. Thank you. PM if interested. Thanks! These are...

Some of you may have seen my original ad, now deleted by me. Now that I have the tires off, I'm able to accurately measure wheel width which is what I should have done from the beginning, sorry guys..... (2) Weld draglite 15" wheels. They measure 5.5" inside bead to bead so I'm guessing...

I'm looking for two red line dog dish caps, something decent, not all bent to he%# & something priced reasonable, there was a set posted yesterday for $30 shipped, they looked decent, looking for a similar deal if you have a couple? Please only reply via a PM, we can exchange emails to get...

I am looking for some 15x7 and 15x8 steel mopar wheels. If I can find a set near Buffalo/Niagara falls reasonably, I'd also like to find some red line dog dishes for them. Send me a PM if you can help. Thank you. :thumblef:

Hard to find radio support bracket, removed from a 69 Barracuda Fastback with thumb wheel/AM/FM radio but I think it fits all radios in the 67-69 family $25 mopar # 2864790 Wiper switch # 3746851 I think this is 73-74 A-body $15 Misc dash knobs from a 67-68-69 I think thy are wiper switch...

Removed from a 69 Barracuda Fastback, front signal housings with lenses ( lenses are original and cracked/spider webbing in them but they are still in one piece, use for a driver or a car with none? Or get new lenses and install on housings after you paint them up! $40/pair. Pics available if...

Four originally tan armrests from a 69 Barracuda fastback with the deluxe interior option., rears have ashtrays. I don't believe you can salvage all of the armrests unless you clean them up or recover them or use the ashtrays in them.. $20/all pics available. Please send a PM if interested...

I'm not sure where to post this but I was cleaning the garage and came across my old spare tire/wheel that was the spare in the trunk of my 67' fastback. The wheel is in good shape, needs stripped and painted for " show" and the tire is pretty good. I want to list it in the classifieds section...

I am looking for a holley R4218 carb if you can help? Thanks guys, Please send me a PM

Hi guys , I'm in need of an ignition buzzer for the "key in ignition" of just about any 1970 A/E or C body. Alot of guys just unplug it and toss it due to the annoying BUZZZZZzzz. But id like to plug one in and see if mine even works. Mine is not in the car as the previous owner must have...

I was wondering if any of you here might have a dual snorkel air cleaner for an older dodge/plymouth? My father is working on a 67' coronet and needs an original air cleaner. May consider a 65-66 style too. But a true 67 preferred. Pics and price shipped to 14304 NY? [email protected]...

I know this is an A-body site, but... Just checking if any of you Mopar guys have or know of any RT style bulge hoods for a 71 challenger in the Buffalo/Niagara Falls/Rochester NY area? Thanks!! Aaron