Search results for query: *

anyone experience vacuum problems when switching from 5.7 to 6.1 manilold

can anyone provide info on the reason for the foam block under the intake on the 5.7 hemi and if i change to a 6.1 intake should i remove the foam or leave in there

i am not sure what engine mgmt system they have with the borla but they did say it did not accomodate the drive by wire so i guess if i go with any other system i will have to replace the computer system i have now

i have looked at all those others and spoken with inglese but they say they dont make anything for the 3g hemi borla does have a system for the 6.1 and it supposedly has a computer system with it but i have a reprogrammed computer for my 67 gtx clone but it utilizes the drive by wire system...

i love the look of the eight stack borla injection but cant find much info on how it works with the 6.1 hemi i have called borla and it seems they dont know much about it either any info would be appreciated stuff like how much computer stuff needs changing and how the throttle body linkage...

hello guys i want to buy an aluminum 6.1 intake to put on my 2008 5.7 i know i will need the kit to adapt it but i want to have it polished if anyone has one let me know

hey friends anyone know offhand what size blots are used on the valve covers and manifold bolts on the 5.7 i am changing both and looking for button head stainless steel

ok thanks guys now where can i find the adapter plates

is anyone offering a chromed intake manifold for the 5.7 hemi. i know street and performance has one for the 6.1 but not sure if that would work. wondering if anyone has put a 6.1 on a 5.7 and what do you have to do in order to do it

anyone have information on a reputable companie that can rebuild a steering column. i have a spare that i would like to get redone any infor appreciated

joe, i want the chrome valve covers pm me with payment info

hello riddler i have a 2008 5.7 do you know for sure that the chrome valve covers you have will work on my motor if so i would gladly pay you 250 for them if that works for you thanks dan

hey guys thanks for the help to update i removed the dust cover and cut away some of the top and it solved the problem i have spoken with the folks at street and performance and they are making some dust covers for the new gen III swaps hopefully they will have them by the street rod nationals...

i did just that it looks like there is some contact between the cover and the bolts on the torque converter so i removed it to test to see if that solves the issue thanks

small block 727 with addition of spacer you can get from mancini racing or street and performance

Has anyone had any issues with noise from around trans flexplate or that area when wide open trottle. mine sounds like a scrapping noise for a few seconds from standing start but it goes away. i have some thoughts that it could be the torque converter cover but i cant find any place that shows...

heres a shot of it almost done

a call to bill in the morning is exactly what i planned to do and i think you could be right he was hoping to avoid making the correct adjustments. the system was easy to install and i even had an issue with the rack unit and when i phoned bill about it he simply said send it back and within two...

Gentlemen i just took my 67 gtx clone to the alignment shop after installing the rms alterkation and the i gave the tech the suggested settings he came back to me and said he could not put 6 degrees in the caster as was in the specs. when he finished i took it out for a test and as i was...

sweet now i just gotta find a set thanks

can anyone tell me if i can replace the 5.7 heads on my 2008 engine with 6.1 heads im not sure if they are compatable

hey that is what i needed to know thanks a lot

on the 5.7 hemi is the trigger wire on the coils the wire that is the same color on each coil or is it the different color wire on each coil thanks for any info

i understand but what i needed to know is if anyone has ever used a car reservoir on a truck pump and mounted it remotely that is what he wants to do since he already has the truck pump but dosent have enought room under the hood for the large reservoir but thanks for your help

hey folks i have a friend who is putting a truck 5.7 in his 33 dodge sedan and was looking at my car 5.7 power steering pump and asked if he could use the same pump on his truck engine (mine has the reservoir attached) but he wants to remote the reservoir i spoke with JR at Bouchillon and he...

that kinda why i was asking when i got mine running and hooked up the elec fan it is set for 180 degrees but the coolant didnt start flowing until around 190 or so my friends who are chevy guys said i needed to change to 180 thermostat that the 195 was too high for this engine i dont see that...

does anyone know what degree the factory thermostat is on the 5.7 hemi?

hey thanks guys do you have a particular model number of autometer

im looking to put a new tach on my 5.7 hemi what is the best brand for this installation i have a tach connection that came with the hotwire system but the equus tach i have will not work with this connection thanks for any info

geeez i couldnt fix the car by myself now you want me to figure out how to take a video of it running your hard to please but ill give it a try lol